Litz Wired Headshell & AT 3600L Cartridge For Sharp Vinyl Record Players Decks Turntables. (2020)

It will fit the Following Turntables: Sharp RP 105H, RP 144H, RP 203R, RP 1033, RP 1122, RP 1414, RP 1144, RP 1818, RP 2000, RP 2626, RP 2727, RP 3500, RP 3636, RP 4705, RP 5100, RP 5200 & RP 7100, RP 7205, RP 7505, RP 7705, RP 9100, RP 9705, RP 1000, SG 220E, SG 220X, SG 309H, SG 315, SG 320E, SG 400E, SG 400H, SG 450E, SG 500E, SG 500H

Detailed Product Information Below.
Litz Wiring: 5N Pure Silver Litz Wiring is the Best Wire for Faster Transmission Speeds and Cleaner Sound. 

It's 0.55mm Outer Diameter, Litz Construction, 7 Strands and Each Strand is 0.1mm in Diameter, its 99.999 % Pure Soft Annealed Silver Wires in oversized PTFE Teflon Insulation. 
Woven Teflon Litz Construction is ideal, it Transmits Electrical Signals faster and with far Less Distortion than Ordinary OFC Wires. 
It Comes Pre Fitted with a Audio Technica AT-3600L Moving Magnetic Stereo Cartridge & Matching Stylus.

It Offers Excellent Sound Quality, we Carry as a Stock Item Replacement Styli should you Damage or Wear Out the One Supplied with this.

Audio Technica AT 3600L MM Moving Magnet Cartridge - Stylus Specifications.

- Output Voltage: 4.2 mV
- Frequency Response: 20Hz-20kHz
- Channel Balance: 1.5dB
- Channel Separation @ 1kHz/10kHz: 24/15dB
- Tracking Force: 2.5 - 3.5 g
- Stylus Type: Highly Polished and shaped .0006 inch Conical Diamond
- Stylus Construction: Bonded Round Shank

This is in Our Opinion By Far the Easiest Way to get your Turntable Up & Running again. You just Plug in it, adjust the Tracking Force & Play!

It is Recommended to Adjust the Tracking Weight on Your Tonearm after Fitting a New Headshell.

If your Tonearm has a Bias Adjustment, Check & Reset that as well.

It is Recommended to Adjust the Tracking Weight on Your Tonearm after Fitting a New Headshell.

If your Tonearm has a Bias Adjustment, Check & Reset that as well.

Free UK Shipping: Orders normally arrive in 2 - 3 days (Monday to Friday)

Annonces similaires mises en avant













ÉtatNeuf (neuf)
Le matériel en état « Neuf » n'est vendu que par un vendeur autorisé ou un fabricant et inclut l'emballage d'origine.En savoir plus
Marque
  • Vinyl Pro
Modèle
  • Sharp (Models As Listed)
Finaliser
  • Black
Catégories
Année
  • 2025
Fabrication
  • Chine

Des informations concernant la sécurité des produits peuvent être disponibles ici.

Vinyl Pro

Hemsby, Royaume-Uni
Membre de Reverb depuis:2025

Protection Reverb

Retours simples, transactions sécurisées, service client humain

En savoir plus

Paiement sécurisé

Reverb Gives

Vos achats aident les programmes de musique destinés aux jeunes à obtenir le matériel dont ils ont besoin pour faire de la musique.

Oups, il semblerait que vous avez oublié quelque chose. Veuillez corriger les champs affichés en rouge.