Holoflash Foil Holographic PINK

US Customers - Tariff costs have been calculated in postage price. Postage will go up with orders of multiple to cover the tariff.

=========================================

Holoflash for your instruments!

Works exactly the same as the original stuff Kramer used in the 80's.

This Holoflash is specifically designed to work on Polyester and Polyurethane painted surfaces.

Straight out of the factory guitars with a gloss finish will work with this Holoflash.

==========================================

Use a crafting iron to apply it (shiny side up, dull side down) by heating and melting it onto the surface.

Clear coating is not necessary and will dull/disrupt the "flash" so I recommend not clear coating.

If you choose to clear coat you will need to use a proper air gun setup.
Rattle Can clear coats will dissolve the flash completely.

It's quite durable and would require you to purposely try and scratch it off to affect the finish.

Best advised to clean guitar with just a damp wet cloth.

This can be layered on top of one another. Apply it in different directions to vary the flashing effect.

==========================================

Gold / Silver: ~60cm x 10cm
Blue / Green / Red / Pink / Clear / Black Holobeam: ~30cm x 20cm

One piece is enough to do small sections (guitar pedal for example).
Two pieces are enough for a standard guitar body.
Three pieces are enough for a larger guitar body/bass guitar body.

Purchase quantity is for 1 piece despite some photos showing multiple strips.

Store unused Holoflash in a dark, dry, cool place (such as a cupboard/wardrobe).

Any folds/crinkles in the material during postage or storage will not affect application/finish.

Hand Cut Stock.

All shipping comes with tracking via Australia Post. Items usually shipped out within 48 hours.