The U3T is a wireless transmitter designed for use with the U3 Microphone Wireless System, and can be used as a replacement or backup unit. Although only one transmitter can be used with a U3R receiver at a time, the receiver can toggle between two transmitter sources by changing from the channel of one to the channel of the other.

TECHNICAL SPECS

WIRELESS TYPE                                    2.4 GHz ISM worldwide open band

BIT DEPTH / SAMPLE RATE                  24-bit / 48 kHz
SWITCHABLE CHANNELS                      6
SIMULTANEOUS CHANNELS                6
MODE                                                  Input: Mic / Line
FREQUENCY RESPONSE                       20 Hz – 20 kHz (-3dB)
DYNAMIC RANGE                                110 dB (-3 dB)
MICROPHONE COMPATIBILITY            Dynamic and battery-powered condenser microphones
SIGNAL-TO-NOISE RATIO                     110 dB
TOTAL HARMONIC DISTORTION          0.2%
LATENCY                                              5 ms
OPERATING RANGE                             27.5 m / 90 ft (line-of-sight)

POWER                        N/A
MODE                          Input: Mic / Line
CONNECTOR                XLR (female)
DIMENSIONS               31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"
WEIGHT                       93 g / 3.3 oz
MUTE                           Yes