DPW Design AV2 Eurorack Attenuverter, Mixer & Comparator Module

AV2 is a Eurorack format dual attenuverter with some extra functions. It can be used as a utility unit for control voltages or as an audio unit.

It has besides the two attenuverter in and outputs a suming mixer output with an attenuverter. This sums the signals after the A and B attenuverters.

When nothing is connected to A or B they can be used as voltage sources. You can set the output to +/- 5V DC. This way you can run an LFO trough A, use B as a voltage offset and get the sum out on SUM, if you for instance need a unipolar signal.

The output A>B is a comparator output with a volume control. This can be used as a logical signal or as audio. The signal on A>B depends on whats coming out from A and B.

Next to each knob is a green/red LED showing the level and polarity of the output signal.

The green/red LED next to the A>B knob shows the signal before the red volume knob so you can se how the comparator reacts before turning up the volume.

The bandwidth of the module is more than 300 kHz.

Connect the power cable with the red stripe down towards the -12V marking. The unit is protected for reverse power.