Nonlinear Circuits Triple Sloths Eurorack White/Gold 2022
Precio200,26 €
+ 19,54 € Envío
Este componente de equipo ya está vendido
Consulta equipos similares de otros vendedores en Reverb
Si sigues este equipo, recibirás una notificación en caso de que el producto vuelva a estar disponible.
Publicado:hace 2 años
Visitas:57
Seguidores:13
Ofertas:1
Bentonville, AR, Estados Unidos
New build, never racked, only powered to verify function.
Works perfectly. Will ship with 10 to 16 pin power cable and screws (specify 2.5mm or 3mm).
Built by me. I'm an experienced builder with dozens of successful builds.
From NLC's website:
This 8HP module contains 3 Sloth chaos circuits. Each one runs at a different rate; Torpor takes approx. 15-30 seconds to travel around 2 strange attractors, Apathy takes 60-90 seconds and Inertia takes 30-40 minutes.
There are no controls for Inertia, it does what it wants.
The pots for Apathy and Torpor do not specifically alter the frequencies, rather the weight of the outputs. Various settings will cause the signals to spend more time traveling around one strange attractor rather than the other.
Apathy and Torpor also have CV inputs. Sometimes the CV signals are injected onto the chaotic signals but depending upon conditions may cause windows of periodicity or voltage jumps. Generally the results are good.
The X, Y & Z outputs for each Sloth are taken from different stages of the circuit and are all different to each other, although Z is simply the inverted version of Y. The three Z outputs are also fed into a Difference Rectifier and the results of this are available from the + and – outputs at the bottom of the panel. The Difference Rectifier outputs are (ignoring diode voltage drops):
out + = VApathy +VInertia - VTorpor If greater than 0, otherwise 0
out - = VApathy +VInertia - VTorpor If less than 0, otherwise 0
Works perfectly. Will ship with 10 to 16 pin power cable and screws (specify 2.5mm or 3mm).
Built by me. I'm an experienced builder with dozens of successful builds.
From NLC's website:
This 8HP module contains 3 Sloth chaos circuits. Each one runs at a different rate; Torpor takes approx. 15-30 seconds to travel around 2 strange attractors, Apathy takes 60-90 seconds and Inertia takes 30-40 minutes.
There are no controls for Inertia, it does what it wants.
The pots for Apathy and Torpor do not specifically alter the frequencies, rather the weight of the outputs. Various settings will cause the signals to spend more time traveling around one strange attractor rather than the other.
Apathy and Torpor also have CV inputs. Sometimes the CV signals are injected onto the chaotic signals but depending upon conditions may cause windows of periodicity or voltage jumps. Generally the results are good.
The X, Y & Z outputs for each Sloth are taken from different stages of the circuit and are all different to each other, although Z is simply the inverted version of Y. The three Z outputs are also fed into a Difference Rectifier and the results of this are available from the + and – outputs at the bottom of the panel. The Difference Rectifier outputs are (ignoring diode voltage drops):
out + = VApathy +VInertia - VTorpor If greater than 0, otherwise 0
out - = VApathy +VInertia - VTorpor If less than 0, otherwise 0
| Publicado | hace 2 años |
| Estado | Impecable (segunda mano) Productos en estado como nuevo están en condiciones nuevas pero han sido abiertos o utilizados.Más información |
| Marca | |
| Modelo |
|
| Acabado |
|
| Categorías | |
| Año |
|
| Hecho en |
|
