Foxpedal Magnifica Deluxe
The Magnifica Deluxe is everything you love about our Magnifica Reverb, only doubled up on everything (except the size).
Stacked for more, more more: The deluxe allows you to stack both reverb circuits (Reverb 1 feeds into Reverb 2) so you can subtley flavor the tones on each wet separately for lush full trails, or you can crank both to the max for some seriously out-of-this world wetness.
Presets: With two full sets of controls, you can dial in two different verb settings, simply press and hold on the corresponding footswitch to "focus" that channel (turns on the channel you are pressing and turns off the other channel).
Feedback 1&2: Dial in the amount of reverb that's fed back into itself. Even into self-oscillation in some cases.
Tone 1&2: Control the tone of the reverberated signal. From dampened warmth, to pure unadulterated glassy-ness.
Reverb 1&2: Adjust the amount of wet*.
Under the hood: Crack this baby open to reveal an additional feedback trim pot for each reverb channel. These trimpots allow you to adjust the maximum range of the feedback knobs so you can tone them down, or crank them all the way into self-oscillation.
Features:
Handwired Construction
Quality hand-wired open frame jacks
Power: Standard 9 volt DC/ negative center, NO internal battery option.
Relay Bypass Soft-touch switching
*This unit will not do full wet, no-dry signal. there is always some amount of dry signal mixed in.
Dimensions: 2.6"W x 4.6"H x 1.5"D
Current Draw: ~130mA
Credit where its due! This circuit design is was inspired by circuits designed by CultureJam and GrindCustomFX.
Stacked for more, more more: The deluxe allows you to stack both reverb circuits (Reverb 1 feeds into Reverb 2) so you can subtley flavor the tones on each wet separately for lush full trails, or you can crank both to the max for some seriously out-of-this world wetness.
Presets: With two full sets of controls, you can dial in two different verb settings, simply press and hold on the corresponding footswitch to "focus" that channel (turns on the channel you are pressing and turns off the other channel).
Feedback 1&2: Dial in the amount of reverb that's fed back into itself. Even into self-oscillation in some cases.
Tone 1&2: Control the tone of the reverberated signal. From dampened warmth, to pure unadulterated glassy-ness.
Reverb 1&2: Adjust the amount of wet*.
Under the hood: Crack this baby open to reveal an additional feedback trim pot for each reverb channel. These trimpots allow you to adjust the maximum range of the feedback knobs so you can tone them down, or crank them all the way into self-oscillation.
Features:
Handwired Construction
Quality hand-wired open frame jacks
Power: Standard 9 volt DC/ negative center, NO internal battery option.
Relay Bypass Soft-touch switching
*This unit will not do full wet, no-dry signal. there is always some amount of dry signal mixed in.
Dimensions: 2.6"W x 4.6"H x 1.5"D
Current Draw: ~130mA
Credit where its due! This circuit design is was inspired by circuits designed by CultureJam and GrindCustomFX.
Este producto es vendido tal cual
Este producto fue vendido tal y no puede ser devuelto al menos qué sea entregado en una condición diferente a como fue descrito o fotografiado.Los productos deben ser devueltos en su estado original junto a todo su empaquetado original. Obtén más información.
| Publicado | hace 10 años |
|---|---|
| Estado | Impecable (segunda mano) Productos en estado como nuevo están en condiciones nuevas pero han sido abiertos o utilizados.Más información |
| Marca | |
| Modelo |
|
| Categorías |
La información de seguridad del producto se encuentra disponible aquí.


