Mint condition, heads are perfect. 

Very clean and extremely low hours of use. 

Fully functional. 

New belt, fully calibrated to the factory specifications. 

Description

Features of the Sony TC-765, 

4-track 2-channel, 3-head tape recorder include:

Three heads and three motors

Closed-loop dual capstan tape drive

AC servo controlled capstan drive motor

High performance Ferrite heads

Separate 3-way bias and equalization selectors

Logic controlled transport function buttons

First stage of the amplifier and the playback head are directly coupled

General

Power Requirements: 110V, 120V, 220V, 240V ac, 50/60Hz

Power Consumption: 90W

Dimensions: Approx. 445(w) x 525(h) x 235(d) mm / 17 1/2 (w) x 50 5/8(h) x 9 ¼(d) inches, including projecting parts and controls.

Track: 4-track 2-channel stereo recording and playback

Tape speed: 7 ½ ips & 3 ¾ ips (19cm/s & 9.5cm/s)

Fast Forward Rewind Time: Approx. 150 seconds with 740 m (2,400 ft) tape

Recording Time: With 1,100 m (3,600 ft), 27 cm reel: Stereo Recording 180 minutes at 19 cm/s. Mono recording 720 minutes at 9.5 cm/s.

Heads: Record head 1, Playback head 1, Erase Head 1

Motors: AC servo-controlled capstan motor 1, Induction reel motor 2Reel: Up to 27 cm (10 ½ inch)

Frequency Response: 

With Sony Ferri-Chrome tape: 30-25,000 Hz, +/- 3dB at 19 cm/s. With SLH tape: 30-25,000 Hz +/- 3dB at 19 19 cm/s. 

With regular tape: 30-18,000 Hz, +/- 3dB at 19 cm/s

Wof and Flutter: DIN +/- 0.07% at 19 cm/s

S/N Ratio: 61 dB (DIN 1975) 

Total Harmonic Distortion: 0.7%

Bias Frequency: 160 kHz

Inputs: MIC (two phone jacks) 

Sensitivity: 0.2mV (-72 dB), 

Impedance: for low-impedance microphone. 

LINE IN (two phono jack), 

Sensitivity: 0.06V (-22 dB), 

Impedance: 100 kOhms. 

REC/PB (connector): 

Input Impedance: less than 10 kOhms.

Outputs: LINE OUT (two phono jacks): Normal level: 0.435 (-5 dB) with PB LEVEL control set to center detent position. 0.775 (0 dB) with PB LEVEL control set to “0”. 

Load impedance: 100 kOhms. 

Suitable load impedance: more than 10 kOhms. 

HEADPHONES (binaural jack): Load impedance: for low-impedance headphones

REC/PB (connector): 

Output impedance: less than 10 kOhms.Other Jack: 11-pin remote jack

Semiconductors: 2 x IC, 3 x FET, 104 x transistors, 89 x diodes

Weight: 27kg (59 lb 8 oz)

Accessories included:

• One Sony empty spool
• Original Sony RM-16 Remote Control

Warranty for one years.

Only serious offers will be considered.

More pictures and details, available on request. Feel free to drop an email.

Shipping worldwide, insured, by DHL Express.