Abyss Devices Saevitum V2 Vacuum Tube VCA Distortion and Filter

This module is gnarly and has a lot of gain distortion.
You can even use it without any input and it will do some weird noise using the resonance and feedback knobs. It will self oscillate with the resonance knob clockwise and feedback switch ON.
RGB LED is under the tube and reacts to the output signal.
You can choose which color using front panel trimmers or at the back trimmer for overall RGB effect amount.
RGB LED can be removed from the circuit and will allow a slightly cleaner more stable sound. (remove all black jumpers at the top right on the back of the module)

– Tube VCA Distortion

– Nasty unstable tube and filter circuit design

– 12AX7 JJ tube included

– Hi-Pass or Low Pass circuit using the switch

– CV Controls for cutoff, resonance, feedback and level

– Attenuator for each CV input with corresponding bipolar red/green LED

– Feedback circuit for gnarly unstable effects (even more gnarly if you use 2 different audio sources)

– Dry/Wet balance

– 2 Input mixing

* The tube color does not change by itself like on the website image, it is just as a visual representation of available colors accessible via the trimmers through the front panel. You use a screw driver to change the color manualy.

Width: 16hp / Weight: 163gr / Depth: 43mm

Power consommation:
-12v: 220mA
+12v: 40mA