Cory Wong is a Grammy-nominated artist renowned for creating some of the finest grooves in all genres. The Cory Wong Wampler Compressor is at the heart of his legendary sound. More than just a compressor and boost pedal, this dynamic toolkit shapes your tone with sparkling cleans and responsive compression right on your amp or directly into your recording interface. Get ready to find the funk!

The Cory Wong Wampler Compressor features two soft-touch footswitches that operate each function of the pedal. For the Compressor side there is also full control over Volume, Sustain, Attack and Blend, as well as Brian Wampler's signature Tone control that can be set to add sparkle and ring to your guitar tone.

For the boost side there is a single boost rotary control that adjusts the amount of boost engaged and a profile switch that sets the mode of the boost circuit from a flat boost to a rich, saturated boost with extra vibrancy around the 550Hz range. The Blend control controls the amount of dry and compressed signal in the compressor circuit.

The compressor is controlled by the independent “Compress” footswitch on the left, the LED will turn green when active. The Boost is controlled by the independent “Boost” footswitch on the right, the LED will turn blue when the boost is active. This particular boost was based on the classic MDX Strat style boost circuit (once favored by Eric Clapton). When both sides are active, the LED will turn rainbow white. On the right side of the pedal is a “Comp On” switch that permanently engages the compressor circuit when pressed - useful for a live setting where you really just want to stomp your feet to boost. The left side has an XLR socket to connect directly to a PA system or mixer and a “Ground Lift” switch that can be used to eliminate unwanted background noise.

The Wampler Cory Wong Compressor delivers all of this with the premium build quality that Wampler is known for.

Both effects individually switchable

Boost mode switch for full frequency or rich, saturated boost

XLR out and ground lift switch for direct connection to a PA mixer or audio interface

"Comp On" switch for permanent compressor activation

Controls: Sustain, Tone, Attack, Volume, Blend, Boost

Buttons: Comp On, Ground Lift

Switch: Boost mode - mid / flat

LED: effect active

Footswitch: Compress Bypass, Boost Bypass

Input and output: 6.3 mm jack connector

Power consumption: 30 mA

Power supply via 9 V DC mains adapter (2.1 x 5.5 mm barrel connector, negative pole inside) - power supply not included

Dimensions (L x W x H): 117 x 64 x 38 mm

Made in USA