IMPORTANT INFO: These b-stock brackets are a little different from what is pictured: they will NOT screw into a 19" rack. The hole spacing for the rack screws is incorrect (1" instead of the proper 1.25"). However, many customers use the bracket ears outside of a 19" rack: in IKEA furniture, custom wood cases, etc. These brackets will work perfectly for a project like that! 


Additionally: The slots for the rail screws are a little taller than normal. They still work for both Intellijel and PulpLogic rail formats. To set the correct height, start by attaching the rails to the brackets, leaving them slightly loose. Screw a module into the rails (preferably one with four screws); this will set the correct rail height. Then tighten down the rail screws, and you're done! 


One bracket, two options! Our brackets can now be adjusted to fit either PulpLogic or Intellijel modules. The rails fasten in an oval shaped slot; widen the distance between the rails for PulpLogic, or move the rails closer together for Intellijel.

Features:

  • Brushed satin finish
  • 84HP rails with 50 x 3mm square slide-nuts and rail-mounting screws
  • Also available in 3U
  • Module screws not included

Assembly required.

Annunci simili in promozione













CondizioneNuovo (Nuovo)
Gli articoli "Nuovi” sono venduti da un rivenditore autorizzato o dal produttore originale e comprendono l’imballo originale.Scopri di più
Marchio
Modello
  • 1U Eurorack Bracket Ears, B-STOCK - 84HP
Categorie
Prodotto in
  • Stati Uniti

Le informazioni sulla sicurezza del prodotto sono disponibili qui.

Informazioni sul venditore

Synthrotek

Moscow, ID, Stati Uniti
Iscrizione a Reverb::2016

Protezione di Reverb

Resi semplici, transazioni sicure, assistenza di persone in carne e ossa

Scopri di più

Checkout sicuro

Reverb Gives

Con i tuoi acquisti dai un contributo ai programmi musicali rivolti ai giovani, aiutandoli a ricevere gli strumenti di cui hanno bisogno.

Ops, forse hai dimenticato qualcosa. Verifica i campi evidenziati in rosso.