Here for sale we have an Epiphone DC Pro in Mojave Fade finish. Made in China in 2019, this guitar features a set-neck construction comprising a Mahogany body with a AAA Flame Maple Veneer top, a Mahogany neck and 24 fret Pau Ferro fingerboard. Chrome hardware is fitted including a Tune-O-Matic bridge, StopBar tailpiece and a set of Grover tuning machines. This guitar comes loaded with a Epiphone ProBucker 3 in the bridge position and a Epiphone ProBucker 2 in the neck, these are wired to a 3-way toggle switch, Bridge Volume w/ push/pull coil-split, Bridge tone, Neck Volume w/ push/pull coil-split and a neck tone w/ push/pull Phase.

The Mahogany neck plays very well, with the Custom ‘C’ neck profile offering a smooth and responsive playing experience across the register. The Pau Ferro fretboard is pleasant under the fingers and the 12" radius is practical for both chordal and melodic playing styles. The double cutaway body design offers comfort in the arms, whilst allowing the player to have unobstructed access right to the 24th fret.

The pair of Epiphone ProBucker pickups installed in this guitar deliver thick and roaring tones, the neck is warm and round, with plenty of power to push your solo tones to the front of the mix or nicely fill out the frequency spectrum when comping. The bridge pickup is of course brighter and sharper, searing into a full-bodied distortion tone which is well suited to rock riffs and tight rhythm parts. The controls feel nicely responsive, allowing you to dial in your perfect tone whilst playing. The addition of the push/pull pots adds even more sonic versatility, with plenty of options from coil split for each pickup and a push/pull Phase control.

Brand- Epiphone

Model- DC Pro

Finish- Mojave Fade

Year- 2019

Made In- China

Top- AAA Flame Maple Veneer 

Body- Mahogany

Neck- Mahogany

Neck Profile- Custom ‘C’

Fingerboard- Pau Ferro

Fingerboard Radius- 12”

Frets- 24, Medium Jumbo

Scale Length- 24.75”

Nut Width- 1.688”

Pickups- Epiphone ProBucker 3 (Bridge), Epiphone ProBucker 2 (Neck)

Controls- 3-way toggle switch, Bridge Volume w/ push/pull coil-split, Bridge tone, Neck Volume w/ push/pull coil-split, neck tone w/ push/pull Phase

Luthier Report

Our ID: 1140726223611
Weight: 8.15lbs
Serial Number: 19011507324 

Aesthetic Condition:
Headstock: Overall excellent condition. Light scratching is present to the front face of the headstock, these can be seen under direct light.

Neck: Overall excellent condition. A very light indentation is present to the bass side 1st fret of the fingerboard, this can not be felt when in the playing position.

Body: Overall excellent condition. Light scratching is present to all aspects of the body, these can be seen under direct light. 

Condition of Frets:
The frets demonstrate light signs of use, not affecting playability. There is considerable material remaining for any fret work the new owner may wish to perform.

Current Set Up:

Truss Rod: Fully functional. Truss rod tool (4mm hex) not included.

Hardware: Overall very good condition. Light to mild tarnishing of the finish is present to all aspects of the metal hardware, this is  most prominent to the pickup covers and T-O-M bridge.

Structural: No concerns or issues to note.
Strings on Guitar - 10-46

Height of string from 12th Fret- Treble 1.5mm - Bass 2mm

Please be aware that the action on a guitar may move slightly in transit and this measurement is the current height.

Electrics:

Fully functional.

Case & Accessories:
No case is provided with this guitar.

Please be aware that for international buyers import fees are not included in our postage and packaging cost, this only covers the cost of the guitar being sent to you. Import fees will be charged by Customs upon the guitar's arrival in the recipient country. Due to Brexit, this also applies to EU buyers. We advise checking the total import cost with Customs as this is not information we are able to accurately provide.