Here for sale we have a PRS S2 McCarty 594 Thinline Electric Guitar in Tobacco Burst finish. Made in the USA in 2020, this guitar consists of a Mahogany body, a Mahogany neck, and a 22-fret Rosewood fingerboard. Other appointments include upgraded Kluson Locking Tuners, a PRS Two-Piece bridge, and Bird inlays. The upgraded pickups installed on this guitar are a Seymour Duncan DimeBucker in the bridge, and a Seymour Duncan SH-1B 59 in the neck. These pickups are wired to two volume controls, two tone controls, and a three-way pickup selector. 

The Mahogany neck plays very well, with the ‘Pattern Thin’ profile filling the hand nicely whilst remaining slim enough for fast, articulate playing. The Gloss finish to the rear assists with smooth navigation of the 24.594" scale, whilst the double cutaway body design and customary PRS sculpted lower horn enhance access to the upper frets. The Rosewood fingerboard is pleasant under the fingers, and with its traditional PRS 10" radius provides a comfortable balance between comfortable chord playing and practicality for lead lines and string bending.

The guitar has been upgraded to feature a pair of Seymour Duncan pickups that sound thick and raw, with a solid output that pushes the front end of an amp nicely. The Seymour Duncan SH-1B 59 neck pickup is full sounding and warm, whilst the midrange is perfectly balanced and easily cuts through any mix. The Seymour Duncan DimeBucker in the bridge has a hotter output, it produces a biting tone which easily cuts through the mix for those rock rhythm sounds and has a great harmonic register. The independent volume and tone controls offer comprehensive control of your sound, feeling very responsive to small changes. This guitar offers a wide selection of tones for the player to explore, with the added coil split feature on the tone controls to access single-coil tones, the ease of the control layout makes finding your perfect tone a breeze.

Brand- PRS

Model- S2 McCarty 594 Thinline

Finish- Tobacco Burst

Year- 2020

Made In- USA

Body- Mahogany

Neck- Mahogany

Neck Profile- Pattern Thin

Fingerboard- Rosewood

Fingerboard Radius- 10"

Frets- 22

Scale Length- 24.594"

Nut Width- 1.664"

Pickups- Seymour Duncan DimeBucker (B), Seymour Duncan SH-1B 59 (N)

Controls- 2x Volume, 2x Tone (Push/Pull Coil Split), 3-way Pickup Selector

Luthier Report

Our ID: 1260426204480

Weight: 7.05lbs  

Serial: 20 52044930

Aesthetic Condition:

Headstock: Overall very good condition. Light to moderate scratching is present to the front face of the headstock, these are most present around the low E and high E tuning machines. A mild chip to the finish is present to the bass side edge of the front face, this has had a finish repair by a previous owner.

Neck: Overall excellent condition. Very light chipping of the finish is present to the early register rear of the neck, these can be seen under very close scrutiny.

Body: Overall very good condition. Light to mild scratching, indentations and chipping of the finish is present to all aspects of the body, the most apparent chipping of the finish can be seen to the rear face bass side horn and lower bout edges, these have exposed the wood beneath. The most apparent scratching can be seen scattered across the rear face and the treble side of the pickups consistent with regular past use.

Condition of Frets:

The frets demonstrate mild signs of use, not affecting playability. Denting and flattening of the frets is apparent throughout the register. There is considerable material remaining for any fret work the new owner may wish to perform.

Current Set Up:

Truss Rod: Fully functional. Truss rod tool (7mm socket) not included.

Hardware: Overall very good condition. Light to mild tarnishing and oxidation of the finish is present to the bridge and tailpiece, this is common with regular past use. The original tuning machines have been replaced with a set of Locking Kluson tuning machines, the original ones are not included.

Structural: No concerns or issues to note.

Height of the string from the 12th Fret-1.5mm - Bass 2mm

Please be aware that the action on a guitar may move slightly in transit and this measurement is the current height.

Strings on Guitar - 10-46

Electrics: Fully functional. The original pickups have been replaced with a Seymour Duncan DimeBucker in the bridge position and a Seymour Duncan SH-1B 59 bridge pickup in the neck position; the original pickups are not included.

Case & Accessories

PRS gigbag.

Overall excellent condition and fully functional. All aspects of the case display light signs of past use. 

Please be aware that for international buyers import fees are not included in our postage and packaging cost, this only covers the cost of the guitar being sent to you. Import fees will be charged by Customs upon the guitar's arrival in the recipient country. Due to Brexit, this also applies to EU buyers. We advise checking the total import cost with Customs as this is not information we are able to accurately provide.