Aria Pro II TS600 TS Circuit Type I Walnut 1979 [912024] (06/15)

1979 Aria Pro II Early Model TS600 in Walnut!

We have received an early 1979 Aria Pro II TS600.
In 1978, the original design models (Proto Type Line) of the Aria Pro II brand were introduced. The following year, in 1979, the TS Series (Tri Sound Series) was added to the lineup as a new product. This particular instrument is a 1979 TS600.
Featuring a 24-fret through-neck body covering two octaves, along with a booster, a 6-position rotary switch, a phase switch, and coil tap switches for each pickup, the control system allows for the creation of over 30 different sounds. It was introduced as a hot series geared toward players looking to establish their own original sound.

Controls (listed from top to bottom...)
(1) Master Volume
(2) Pickup selector switch
(3) 6-position rotary switch
(4) Booster On/Off Switch
(5) Booster Volume
(6) Neck Pickup Coil Tap Switch
(7) Bridge Pickup Coil Tap Switch
(8) Phase Switch
(9) Master Tone

The pickups are in original condition and feature the original Aria Pro II EXTRA-II zebra-striped finish.
Furthermore, there are no signs of unusual soldering work on the controls, so it appears to be a fully original, solder-virgin instrument.
Although the body is made of SEN WOOD, it tends to be lightweight despite its 5-piece through-neck construction of maple and walnut.

Overall Condition
As this instrument is 47 years old, it shows various scratches and wear on the wood and finish typical of its age.
Additionally, while there is some torque degradation in the Kluson Type 6 line tuners (nut-mounted style) and some warping in the button shaft of the first-string tuner, there is no critical damage, and the controls function well.
Considering its age, this is a rare specimen that remains clean and in good playing condition.

Condition Grade: B+: Some scratches, but no issues for normal use

Serial Number: 912024
Year of Manufacture: 1979
Country of Manufacture: Japan
Case: Soft case (with lettering painted on the outer pocket)
Accessories: None
Weight: 3.61 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.6 mm
Neck thickness near the 12th fret: 24.5 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repair/Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling and shaping, mirror finish on control panel

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup. These measurements are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase and do not guarantee that the values will be the same when the item arrives.

* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to remove product listings promptly upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your country

We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.

More information please confirm our shop policy.