The Audio-Technica AT-LPW50BT-RW is a fully manual belt-drive turntable on a 30 mm MDF plinth with rosewood-finished veneer. It plays 33-1/3 and 45 RPM records and outputs analog RCA (PHONO or LINE) or Bluetooth 5.2 (SBC).

Tonearm and Drive

A static-balanced straight carbon tonearm (effective length 223.6 mm / 8.80") ships with an AT-HS4 SV headshell and AT-VM95E BK cartridge (0.3 x 0.7 mil elliptical). The DC servo motor uses Active Speed Stabilization. Bluetooth range is listed as line of sight approx. 10 m (33').

Specifications

• Drive: Belt drive, fully manual
• Motor: DC servo with Active Speed Stabilization
• Speeds: 33-1/3 and 45 RPM
• Platter: Die-cast aluminum
• Plinth: 30 mm MDF with rosewood-finished veneer
• Wow and flutter: <0.15% WRMS (33 RPM) at 3 kHz
• Signal-to-noise: >60 dB
• Cartridge: AT-VM95E BK Dual Moving Magnet (0.3 x 0.7 mil elliptical), pre-mounted on AT-HS4 SV headshell
• Replacement stylus: AT-VMN95E BK
• Tonearm: Static-balanced straight carbon; effective length 223.6 mm (8.80"); overhang 18.6 mm (0.73")
• Tracking force: 0 to 3.0 g adjustment
• Applicable cartridge weight: 11.5 to 16.5 g including headshell
• Phono output: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Line output: 200 mV nominal at 1 kHz, 5 cm/sec
• Phono preamp gain: 35 dB nominal, RIAA equalized (switchable PHONO/LINE)
• Bluetooth: Version 5.2, A2DP, SBC codec, line of sight approx. 10 m (33')
• Power: 100 to 240 V, 50/60 Hz, 0.5 A max; 1.8 W; AC adapter 12 V, 1.0 A
• Dimensions (W x D x H): 420 x 340 x 126 mm (16.54" x 13.39" x 4.96")
• Weight: 5.5 kg (12 lb)

In the Box

• Dust cover and hinges
• Rubber mat
• Platter with drive belt
• Counterweight
• AT-HS4 SV headshell with AT-VM95E BK cartridge
• 45 RPM adapter
• RCA audio cable, approx. 1.0 m (3.3')
• AC adapter, approx. 1.5 m (4.9')