The Audio-Technica AT-LP70XBT is a fully automatic belt-drive turntable that plays 33-1/3 and 45 RPM records and outputs analog RCA or Bluetooth 5.2 audio (aptX Adaptive, aptX, and SBC). This finish is black/silver.

Cartridge

An AT-VM95C Dual Moving Magnet cartridge (0.6 mil conical) is integrated into the J-shaped tonearm and cannot be removed. Any VM95 Series stylus snaps onto the same body. Start and stop are automatic. The built-in preamp switches between PHONO (4.0 mV) and LINE (252 mV).

Specifications

• Drive: Belt drive, fully automatic
• Motor: DC motor
• Speeds: 33-1/3 and 45 RPM
• Platter: Die-cast aluminum
• Wow and flutter: <0.25% (WTD)
• Signal-to-noise: >55 dB
• Cartridge: AT-VM95C Dual Moving Magnet, integrated (not removable); 0.6 mil bonded conical stylus
• Replacement stylus: AT-VMN95C; any VM95 Series stylus
• Tonearm: J-shaped; effective length 220 mm (8.7"); overhang 18 mm (0.71")
• Phono output: 4.0 mV nominal at 1 kHz, 5 cm/sec
• Line output: 252 mV nominal at 1 kHz, 5 cm/sec
• Phono preamp gain: 36 dB nominal, RIAA equalized (switchable PHONO/LINE)
• Dimensions (W x D x H): 400 x 330 x 110 mm (16" x 13" x 4.3")
• Weight: Approx. 2.9 kg (6.4 lb)
• Power consumption: 1.6 W
• Bluetooth: Version 5.2, A2DP profile, line of sight approx. 10 m (33')
• Bluetooth codecs: Qualcomm aptX Adaptive, Qualcomm aptX, SBC

In the Box

• Dust cover and hinges
• Felt mat
• Platter with drive belt
• 45 RPM adapter
• RCA audio cable, approx. 1.0 m (3.3')
• AC adapter, approx. 1.5 m (4.9')