used Boss Green Label Taiwan BOTTOM PLATE - has serial number on it, April 1991 [specifically from HF2 - but can be for some CE-3, BF-2, CE-2B, and BF-2B (NO pedals, NO other parts)]

Up for grabs is a used Boss Green Label Taiwan BOTTOM PLATE. It has the serial number on it. From April 1991 [specifically from a HF2 Hi-Hand Flanger pedal - but it can be for some CE-3, BF-2, CE-2B, and BF-2B (NO pedals included, NO other parts included)].

• serial-number-decoder.com/boss/boss.htm
• Serial Number: ZC59215
• This item was made in April-1991

Specific details about the condition of this item are after this next section.

====

To make sure that you get the correct item for your Boss pedal - here is some informative info:

NOTE: aside from the version HF-2 pedal (No pedal included) that uses this type of bottom plate (with the cut out for the power jack) with the GREEN Bottom Label TAIWAN (which should have the very small serial number label on the bottom center area of the GREEN Bottom Label TAIWAN) - there are NOT that many other model BOSS pedals that this bottom plate goes with. From my knowledge and from my research I know that a version of the CE-3, BF-2, a version of the CE-2B , and a version of the BF-2B do. Not sure if there are others. NO pedals included.

+++++++

NOTE: Some BOSS pedals were made in Japan which had a Green Label Japan: CE2, CE3, BF2, CE-2B, BF-2B.  These Japan made Boss pedals had the serial number in the battery compartment. They used an ACA adaptor. Therefore some of the info on the Green Label Japan (NOT for sale in this listing) was different from the GREEN LABEL TAIWAN (which is for sale in this listing).

And there was a version of the CE-2, BF-2 (and I think CE-3) that had Green Label Taiwan - but they had the serial number in the battery compartment,

• I am mentioning the above info so that you get the correct Green Label Taiwan Bottom Plate for your Boss pedal and to just give you general Boss info.
• NO pedals included / NO adaptor included

===

CONDITION:

As you can see - the Back Side of this bottom plate has a very small factory made 1/2 square shape cut out [notched for fitting the power jack (power jack NOT included)].

It's in used medium relic'd (some may say medium to heavy relic'd) shape from actual player's wear and from age. It has several visibe imperfections: nicks, scratches , scuffs, impressions, nicks, creases. rust spots, oxidation. (SEE pictures).

GREEN LABEL: The upper 1/2 is mostly clearn with a few imperfections - mostly a few very light hair-line surface scratches. The lower 1/2 has visible tiny, very small, and small nicks, very short & short creases, and very light & light short scratches.

SMALL LABEL with SERIAL NUMBER: Most areas are generally clean. Main areas have a couple of tiny & very small nicks. A few edge areas have a few very tiny nicks.

BLACK RUBBER Piece: It has a lot of visible scuffs, some surface cloudiness, some kindof shiny areas, and is has a short line scratch. Also - it has hardened from age & use.

METAL PLATE: The TOP SIDE outer areas (that border the black rubber part) have some oxidation, discoloration, and some rust spots. The Very OUTER EDGES also have a couple of tiny & very small rust spost and light oxidation The BOTTOM SIDE: serveral areas have visible rust spots / rust lines (mostly on the border areas). So there is unevenness in / on the finish and in / on the metal where the rust is. The Bottom Side also has a couple of nicks & scratches and some oxidation & discoloration.

• The BOTTOM Side can be sanded (smoothed out and cleaned) and then spray paineted silver or gray - but I'll leave that you take on (if you feel the need to do so).
• Please message me if you would really like me do this for you 😉.

-----

I took many pictures of this bottom plate (where you can see the metal plate part , GREEN the label, the small labbel with the SN and the rubber part).

There may be some imperfections that I overlooked.   There may be some imperfections that can be seen in person that do not appear in the pictures.   The are / may be some imperfectionsthat look different in the pictures compared to how they look like in person. And - there maybe some glares that show up in the pictures that are not visible in person. 

-----------

Here are links for the other BOSS bottom plates that I have listed:

• https://reverb.com/item/87508467-used-genuine-boss-blue-label-japan-bottom-plate-missing-serial-number-from-1990-center-area-of-back-edge-has-cut-out-for-power-jack-was-originally-from-a-dd-3-pedal-no-pedal-no-other-items-no-screws
• https://reverb.com/item/97882792-used-genuine-boss-pink-label-taiwan-bottom-plate-missing-serial-number-from-1998-pink-bottom-label-silver-text-graphic-silver-metal-bottom-plate-was-originally-from-a-bf-2-pedal-no-pedal-no-other-items-no-screws
• https://reverb.com/item/97938150-lite-use-boss-bottom-plate-for-compact-regular-size-pedal-no-label-no-rubber-padding-no-cut-out-for-power-jack-no-screws-metal-gray-finish-on-both-sides-from-2011-from-taiwan-made-boss-pedal-but-can-fit-japan-made-pedal-no-other-items
• Please message me first if you plan to purchase more than one Boss Bottom Plate. This way you won't double, triple, .... pay for shipping / packaging and only pay what the s/p comes out to be.

---------------

• Comes from a smoke free and pet free environment.

• Feel free to ask questions.
• Will discount shipping on combined purchases!!

• USA shipping is with USPS (with tracking)
• International Shipping is with First Class Mail International (with tracking).

CA Prop 65 Warning!
Everything sold into the state of California contains agents known to the state of California to cause cancer and birth defects, reproductive harm, or other, as yet unnamed, harm to its citizenry.