Manifold Research Centre Cloud Chamber Eurorack Joystick & CV Recorder Module
Cloud Chamber is a voltage recorder capable of generating 11 phase & time shifted variants of its buffer material. Its output range is +10V/-10V.
Cloud Chamber will begin recording with the switch ‘up’. The MAX recording time is 16s with a sampling rate of 1 Khz.
Cloud Chamber is a tool for CV record and playback and the recommended maximum recording frequency is 20Hz.
With no input Cloud Chamber will listen to the joystick Y axis movement (+5V/-5V) and a joystick press during recording will generate a GATE signal.
With the switch in the centre position the record buffer is closed and Cloud Chamber will loop and playback your recorded material. The joystick now controls the output relationship in the time (X axis) and phase (Y axis) domain. A joystick short press will reset X & Y parameters to 0. The joystick phase control is up to 360 degrees (relative to the buffer). The time control slows down when going to the LEFT, and gets faster when going to the RIGHT.
There is a hierarchy between the OUTPUTS that is always respected, time control affects the
OUTs from BOTTOM to TOP.
Moving on the X axis will introduce a spread until every output will be distributed over WINDOW 1 of the ratio_table; going further will slowly offset every output towards WINDOW 2.
Cloud Chamber's buffer speed can be divided up to 48 times, or multiply up to x24 times.Z
The ratios used for time control, together with the quantised interpolation, keeps the outputs
in a nice relationship.
Stalled buffer / Freeze (switch DOWN):
in this STATE, the buffer stops playback (every output behaves like a fixed voltage), letting you manually navigate through time using the joystick ( respecting the rate and phase settings that have been set during playback mode).
Buffer Size control (only when CLOSED buffer)
The Buffer start and end points can be modified, to do so Press & Hold the joystick for at least 0.5s, on release the RGB status light will be lit in WHITE, now your joystick X axis will control your Start point and Y axis the End Point of the buffer (a joystick SHORT press will reset your buffer to its original size); once set, exit the submenu by Press and Hold.
SAVE/LOAD
SHORT Press the RED button to enter the save/load sub-menu. Navigate through the six available slots using the joystick X axis, the slots are color coded though the RGB status light. To SAVE go UP, to LOAD go DOWN.
MORE INFO ABOUT THE OUTS
CC is meant for CV controls, it can playback precise voltages up to 20 Hz, after that, the low pass filters on the outs start attenuating, it can still output audio rate material, but it will come out at a lower amplitude.
| Condizione | Nuovo (Nuovo) Gli articoli "Nuovi” sono venduti da un rivenditore autorizzato o dal produttore originale e comprendono l’imballo originale.Scopri di più |
|---|---|
| Marchio | |
| Modello |
|
| Categorie |
Le informazioni sulla sicurezza del prodotto sono disponibili qui.

