Brand New AudioResolution HA8 Headphone Amplifier, LC1 Controller & AFP16 Audio Player

Brand New AudioResolution High End Studio, Broadcast and Installation Set Up. Audio Resolution stands as a prominent European entity specializing in the production of professional audio devices tailored for broadcast and theatrical environments.Set up includes all new in box HA-8,Modular, 8 stereo channel studio headphone amplifier, LC-1 Modular, 8 stereo channel studio headphone amplifier
Product description HA-8 Modular, 8 stereo channel studio headphone amplifier

Professional analog, modular, High-Fidelity, 8-channel stereo, studio headphone amplifier with remote voltage volume control (VCA) which guarantees perfect balance between Left and Right channels.

Signal path is complete analog with high dynamic headroom and lowest noise and distortion.

Features three balanced stereo audio inputs, 8 stereo headphone outputs, 8 remote volume control units with input routing switch and headphone output.

The unit is suitable for professional recording and broadcast studios.

• 3 stereo balanced inputs
• 8 independent headphone outputs
• Local/ remote headphone outpu
• Wide regulation range
• Input selection routing switch
• High power independent to headpone impedance
• High-Fidelity, High-Performance audio amplifier
• High output power
• Rack mountable – 2RU
• Can be downscaled to four stereo headphones channels
• includes 8 remote headphone volume control unit

• Input section
• Number of inputs: 3x stereo
• Input connector: 6-pin Phoenix
• Input sensitivity: Line level
• Nominal input level 0 dBu
• Input type: Analog
• Output section
• Number of outputs: 8x stereo
• Output connector: 3-pin Phoenix (unit)
• JACK 6,3 stereo (remote)
• Remote connector: RJ45
• Output noise level: -89dB / 0dB gain
• -92dB /gain at minimum
• THD+N: < 0,03% @15Ω, 1kHz
• Output power (THD+N < 1%) 0,9W @15Ω
• 1,3W @32Ω
• 0,6W @100Ω
• 0,1W @600Ω
• Frequency response: 20Hz - 20kHz /-0,1dB
• 10Hz - 100kHz /-0,15dB
• Cooling: Active
• Controlling the amp:
• Control: external via remote control panel
• Controls: Input source switching, volum
• Max. lenght of remote cable
• 25m /*longer cable can negatively affect frequency
• response and maximum output power
• Recomended remote cable AWG: AWG24 and better
• Power
• Power supply: 24V DC /5A
• Measurements and weight
• Central unit
• Height in RU 2RU
• Dimmensions HxWxL: 88x480x255 mm
• Weight: 5kg
• Remote control panel
• Dimmensions HxWxL: 95x70x50mm
• Weight: 0,2kg

 LC-1 Studio monitor control unit with talkback and GPIO logic

Studio monitor control unit with two talkback inputs and GPIO logic. It features studio monitors playback and talkback blocking on Recording or On Air Red Light, Red Light GPI input, talkback GPI output, gain and phantom power select for talkback inputs.

The unit is suitable for professional recording and broadcast studios.

• 2 talkback mic/line inputs
• Adjustable gain and phantom power for talkback inputs
• Separate talkback audio output
• Isolated Red Light GPI input
• Talkback GPI outputs
• Separate enable switches for talkback and playback blocking on RED light
• GPIO indication LEDs
• Simple CAT5e cabling for talkback microphone remote control panels

Input section

• Number of inputs: 2x Talkback mono
• 1x Monitor stereo input
• Talkback input
• Input connector: 5-pin Phoenix
• RJ45
• Input level MIC
• Gain settings: +40dB, +20dB
• Phantom power: Yes, switchable
• Controls: Gain switch, Phantom, level
• Talkback Out
• Output noise level: -85 dBu / 40dB Gain, Level at middle position
• -90 dBu /20dB Gain, Level at middle position
• Max. output level: +27 dBu / THD+N < 0,1%
• Studio monitor In/ Out
• Input connector: 2x 3-pin Phoenix
• Output connector: 2x 3-pin Phoenix
• Input/ Oytput level: MIC/ LINE
• IN/ OUT switching: Relay
• GPIO section
• GP outputs: Talkback active
• GP inputs: Talkback Mic 1
• Talkback Mic 2
• Red Light
• Front panel
• Signalization: Power, Talkback Mic 1, Talkback Mic 2, Red Light
• Controls: Talkback Enable
• Playback enable
• Power
• Power supply: 24V DC /1A
• Dimensions and weight
• Dimensions HxWxL: 44x480x265 mm
• Weight: 3,4 kg

AFP-16 Professional instant messaging audio player

Professional SD card audio announcement player with 16 instant play buttons with LED indication of playback.

It features GPI inputs for blocking announcement playback with visible signalization of playback blocking, built in speaker for playback monitoring with separate volume control, announcement master volume control and GPI output which is active during announcement playback.

The unit is suitable for theaters, sports arenas, shopping malls, etc.

• 16 playback buttons with LED playback indication
• Transformer balanced audio output
• Isolated GPI inputs and output
• Announcement master volume control
• Announcement playback blocking signalization
• Built in control speaker with volume control

Playback

• Number of direct play buttons: 16
• Built in monitor speaker: Yes
• Max. output power: 8W
• Monitor volume control: Yes - potentiometer
• Playback blocking signalization: JUMBO RED LED
• Playback storage: SD/SDHC card
• Supported audio formats: MP3 mono/ stereo, 44,1kHz, 32kbit/s - 320kbit/s
• WAV mono/ stereo, 16-bit, 44,1kHz
• Supported SD card format: FAT16, FAT32
• Analog
• Output connector: 3-pin XLR
• Output type: Analog, transformer balanced and isolated
• Max. output level: +4 dBu
• GPIO
• Number of GP inputs 2
• GP input type: optocoupler
• GP Input voltage: 12-24V
• Number of GP outputs: 1
• GP output type: relay
• GP Out contact rating: 50V /0,5A
• Power
• Power supply: 12V DC /1A
• Dimensions and weight
• Dimensions HxWxL: 88x480x140 mm
• Height in RU: 2 RU
• Weight: 3,1 kg

You can find even more details at