Resor 3300 4-Channel Rotary DJ Mixer (black)

Part of Resor's exceptional line-up of boutique, audiophile-standard rotary mixers, the 3300 is a four-channel design with three-band channel EQs, three-band master isolator and sweet sound quality. Supplier's Notes: The Resor 3300 is Resor's latest addition to the rotary mixers. It features a fully discrete class-A Master Isolator, 3-Band EQ per channel, a dedicated Microphone input with volume control, four Phono/Line preamps, Urei-style knobs, and more. With this model, Resor bring an all-new discrete master Isolator developed over six months. The new class-A circuitry carries over the 24 dB /Oct filters, crossover frequencies, bypass Relay, and a "full cut" to a maximum boost of +12 dB. With the staggering number of components, including 28 BJT and 32 FET transistors, Resor have achieved outstanding performance in sound and measures. The 3-band channel EQ is an entirely new design. It brings a fresh set of frequency curves and attenuation levels across all three bands, a lower noise floor, and retaining the discrete Op-Amp on duty. There is a different curve across these two segments, with the Isolator having a more pronounced sweep and colour. In use, this means that per channel, you get to craft your sound via the EQ and then craft further still with a different tonal balance with the Isolator. Across the EQ and Isolator, plenty of headroom is available across all frequency ranges, providing plenty of control when crafting the audio. Each of its four channels features hi-fi Phono and Line inputs. With Phono preamps delivering 44 dB of Gain, both vinyl and digital are well-balanced. Further refinements on the Phono preamps gave us even more pleasing dynamics, headroom, and a broader frequency spectrum. Resor offer an additional element of customisation that one can specify when they place their order, ranging from adding an FX-bus, changing the combination of colours for the faceplate to different wood finishes and knob options. Inputs Channels 1-4: selectable PHONO & LINE (RCA) Microphone: dedicated XLR with own control Outputs Master 1: Balanced XLR Master 2: Unbalanced RCA Booth: Balanced TRS Rec: Unbalanced RCA Channel EQ 3 Band Baxandall: Bass +/- 18 dB (at 150 Hz), Mids +/- 10 (at 800 Hz), Treble: +/- 10dB (at 10 kHz) Master isolator Fully discrete class-A circuitry 3 Band, 24 dB /Oct, Linkwitz-Riley filters, crossover frequencies at 310 Hz and 3100 Hz, Full-cut to maximum +12 dB, ON/OFF true bypass with Audio Grade Relay Master insert Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground) - post Master Isolator In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground) - pre Outputs 3300 FX (Send and Return) Effects Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground) Effects In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground) Customisations Wood: Natural Oak, Matte Black, Walnut Faceplate (Matte Aluminum): Black, Bronze, SIlver; Premium Metallic Red, Metallic Green, Metallic Blue Knobs style: Resor Standard, Urei knobs; Premium knobs: Silver Matte Aluminum, Black Matte Aluminum VU-Meters: Standard, 4x Round (one per channel) Other 2 x Analog VU Meters (1VRMS = 0db) Cue/Mix Switch for the VU Meters, to display either the Cue or Mix signals Rotary Switch to CUE between all four Channels Cue/Mix Blend potentiometer Audio Grade external Power Supply Unit 3 Years International Warranty Line Inputs Discrete, Class-A Op-Amps Measured Line In to Master Out: Frequency response +/- 0,3 dB, 20 Hz to 20 kHz THD+N better than 0,004 % SNR better than -95 dB Phono Inputs Discrete, Class-A Op-Amps, Gain 44 dB Passive RIAA Equalization, polypropylene capacitors, close tolerance Input impedance is 47 kohm Input capacitance is 47 pF Measured Phono In to Master Out: RIAA accuracy within +/- 0,3 dB (20 Hz - 20 kHz) THD+N better than 0,02 % SNR better than -77 dB Maximum input signal level before distortion 100 mVRMS Master Output Balanced XLR Unbalanced RCA L and R Impedance < 300 ohm Booth Output Balanced TRS Impedance < 300 ohm Record Output Nominal level -10dBV Impedance < 300 ohm Crosstalk Channel Fader offness < -100 dB Channel L/R separation <-70 dB Isolator offness < -90 dB Dimensions 330 mm (W), 275 mm (D), 98 mm (Height - measured from the faceplate and including the rubber feets) Weight Mixer: 5.3 KGS Power Supply: 1 KGS With travel case: 11 KGS