EVO 16 & SP8 Rack Ears (Rack ears only)
Prix£13.20
TVA incl.
+ £7.20 Expédition
en cas d'expédition groupée
1
10+ en stock
Mis en ligne:il y a plus d'un mois
Vues:3 995
Ajouts aux favoris:31
Basingstoke, Royaume-Uni
Politique de retour de 14 jours
Profitez de votre nouveau matériel en toute sérénité
Authentic Audient EVO 16 Rack Ears (Rack ears only) + mounting bolts. Sold directly from the manufacturer.
What's included:
1. Use a 3mm allen key (not included) to remove the two screws on either side near the front
of the unit.
2. Position the rack ear so that the four screw holes are in line with the four
holes found on the side of the EVO 16. Refer to the last image above for correct
positioning. Insert the x4 M4 screws into the holes, and tighten until firm.
Repeat the process again for the other rack ear.
3. Remove the rubber feet which are located on the bottom of the EVO 16
using a Pozidriv screwdriver.
Caution regarding placement
It is not advised to run the unit in a rack above or below hot units such as valve outboard and multichannel AD/DA converters without suitable ventilation space around the unit.
We would suggest a space of at least one rack unit above and below the unit. Ensure side air vents are not covered.
Ensure side air vents are not covered. Additionally, do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Shipping to UK Mainland Only.
Postage cost: £6 + VAT via UPS - a tracking number will be provided.
What's included:
- x2 Authentic Audient EVO 16 Rack Ears
- Mounting bolts
1. Use a 3mm allen key (not included) to remove the two screws on either side near the front
of the unit.
2. Position the rack ear so that the four screw holes are in line with the four
holes found on the side of the EVO 16. Refer to the last image above for correct
positioning. Insert the x4 M4 screws into the holes, and tighten until firm.
Repeat the process again for the other rack ear.
3. Remove the rubber feet which are located on the bottom of the EVO 16
using a Pozidriv screwdriver.
Caution regarding placement
It is not advised to run the unit in a rack above or below hot units such as valve outboard and multichannel AD/DA converters without suitable ventilation space around the unit.
We would suggest a space of at least one rack unit above and below the unit. Ensure side air vents are not covered.
Ensure side air vents are not covered. Additionally, do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Shipping to UK Mainland Only.
Postage cost: £6 + VAT via UPS - a tracking number will be provided.
| État | Neuf (neuf) Le matériel en état « Neuf » n'est vendu que par un vendeur autorisé ou un fabricant et inclut l'emballage d'origine.En savoir plus |
|---|---|
| Marque | |
| Modèle |
|
| Finaliser |
|
Des informations concernant la sécurité des produits peuvent être disponibles ici.
