Mamba 32 ch x 32 ch Analog to MADI converter 96K (bi-directional) 1RU

Mamba Analog to MADI converter is a high quality, plug & play and affordable product from NetworkSound. The Analog to MADI converter is bi-directional (Analog in to MADI and MADI in to analog out) and available in 16x16, 32x32, 48x48 and 64x64. The 48x48 and 64x64 versions come with a 32 MADI main unit and an extension unit using CAT-5 (total 2 RU) to give you the full 48x48 or 64x64 channels at low cost. Mamba MADI converter has an option to run as Master Clock (internal clock) or MADI recovered clock. Sample rates of 48 and 96 kHz in Master mode and 44.1/48/96K in Slave mode are supported. The Mamba MADI converter uses premium AKM audio converters and a high quality PLL for audio clock which provides an exceptional audio conversion between MADI and Analog.

4-7 day shipping after receiving order

Mamba MADI converter is being used to cover major broadcast events such as MLB world series, PGA tour, TV studios and in major recording studios. Mamba MADI is an ultra reliable product that is set once and forget for rest of the operation. Mamba MADI is implemented with advanced self healing technique that automatically recover if any clock issues are identified. When Mamba MADI is in slave mode, all settings are automatic as any changes on MADI master is detected and reset immediately.
Easy to upgrade to 48x48ch or 64x64ch easily by adding a low cost CAT=5 extension unit (16x16 or 32x32). No changes required to the main MADI unit. You can do it any time when there is a need.
Analog Input: Maximum input level = +18 dBu
SNR=105 dB
THD+N (1kHz @ -1dBFS) = 0.005% (@48K) & 0.0029% 9@96K)
Noise floor = - 87 dBu Input impedance = 4.53 Kohm
DB25 - Tascam Analog Pinout
Analog output: Maximum output level = +18 dBu
SNR = 114.6 dB
THD+N (1kHz @ -1dBFS) =0.0048% (@48K) & 0.0029% 9@96K)
Noise floor = - 96 dBu Output impedance = 100 ohm
DB25 - Tascam Analog Pinout
MADI Interface - BNC - BNC Tx and RX standard MADI - Connect a 75 ohm BNC/Coax cable - Distance of 100-200 ft
MADI Interface - Fiber - Multi Mode fiber with SC connector - Connect any MM fiber cable - Distance of up to 1.5 Km - TX and RX fiber (2 pcs) required
Front Panel:
Power LED - Indicates power is ON
MADI BNC Link LED - Indicates BNC link is ON
MADI Fiber Link LED - Indicates Fiber Link is ON
SYNC LED - Indicates Mamba MADI is in sync
Select Switches
WC INT / EXT - Master or Slave operation - INT selects Mamba MADI as MASTER (internal word clock) - Other end MUST be a slave for proper operation - EXT selects Mamba MADI as Slave - When in Slave mode, you need to use WC Sel switch to select   word clock source
WC BNC/MADI - Selects WC from BNC or MADI incoming (when M/S is set as Slave) - BNC selects WC from BNC input (44.1 / 48 or 96K) - MADI selects recovered clock from MADI stream (Ext CLK is not available on Analog system)
48K/96K - selects sample rate - Master Mode only - This selection is available only when Mamba is MASTER mode - In MASTER mode 48 or 96K sample rate supported - In SLAVE mode, the sample rate of Mamba follows the master device automatically - In SLAVE mode 44.1, 48 or 96 K sample rate supported
MADI CH - selects 1-32 or 33-64 ch - This switch will select audio channels from incoming MADI   stream to the analog outputs - 1-32 select would take first 32 ch from MADI stream to output - 33-64 select would take 33-63 ch from MADI stream to output - in 96K - 1-32 only - On TX MADI - 1-32 is sent on 1-32 and 33-64
Power Supply: Universal power supply AC 90-240V. Max power consumption: 12W - 18W ON/OFF switch
Rack mountable Chassis: 1U (19" [L] X 12" [D] X 1.75" [H]) Solid steel and professional finish Weight: 9 pounds 16x16 model Weight: 12 pounds 32x32 model
Operating Temperature: -0° C to 50° C
1U rack mount box (19"(W)X12"(D)X1.75"(H)) @ 12 pounds
Storage Temperature: -25° C to 70° C
Warranty: Two year warranty
Approvals: FCC, Canada, CE