SEND & RETURN FX Signal Loop Selector Pedal Group Bank Tuner Send Kill Switch side or face mounted jack sockets

THE SEND & RETURN FX LOOP SELECTOR

ORIGINAL HANDWIRED DESIGNS BY CREBER INSTRUMENTS. DEVON, ENGLAND.

THE SEND & RETURN FX LOOP SELECTOR IS A SIMPLE DEVICE WHICH CAN BE USED TO ENGAGE OR DISENGAGE AN ENTIRE CHAIN OF EFFECTS PEDALS AT THE CLICK OF A BUTTON.

HAVE YOU EVER NEEDED MULTIPLE EFFECT PEDALS ACTIVATED ALL AT ONCE, JUST IN TIME FOR YOUR SOLO? USE THIS DEVICE TO ACTIVATE AN ENTIRE CHAIN SIMULTANEOUSLY, ON THE BEAT.

IF YOU HAVE A HUGE PEDAL BOARD WITH TONS OF DEVICES, USE THIS SELECTOR TO SIMPLIFY THE PEDAL CHAIN, BY COMPLETELY ELIMINATING AN ENTIRE SECTION OF DEVICES; HEAR YOUR INSTRUMENT WITH NOTHING IN THE WAY!

WHY NOT ALLOCATE ALL BUFFERED PEDALS TO THIS FX LOOP SO THESE CAN BE COMPLETELY REMOVED FROM THE CHAIN, KEEPING YOUR SIGNAL FLOW ALL ‘TRUE BYPASS’-THUS MAINTAINING THE PUREST TONE.

THINK OF THIS UNIT AS A RE-ROUTING DEVICE OR ‘INJECTION POINT’ WHICH ENABLES YOU TO DROP IN/OUT AN ENTIRE CHAIN OF PEDALS WITH ONE CLICK.

IF NO CABLE IS CONNECTED TO THE RETURN SOCKET, THE DEVICE CAN ALSO SERVE AS A TUNER SEND, 'KILL/MUTE' SWITCH OR A/B SELECTOR.

WATCH PRODUCT DEMO VIDEO

SPECIFICATION & FEATURES:

- CHOOSE WHETHER YOUR SIGNAL FEEDS DIRECTLY TO & FROM CERTAIN PEDAL CHAINS OR EFFECT PROCESSORS.

- ACTIVATE SEVERAL PEDALS AT ONCE.

- EASILY ACTIVATE OR REMOVE CERTAIN PEDALS FROM THE SIGNAL FLOW, E.G. KEEP YOUR CHAIN ALL ‘TRUE BYPASS’ BY ALLOCATING ALL BUFFERED PEDALS TO THIS LOOP.

- COMPLETELY PASSIVE/TRUE BYPASS SWITCHING WITH ZERO EFFECT ON TONE.

- SUITABLE TO USE WITH ANY INSTRUMENT OR DEVICE THAT CAN BE CONNECTED VIA 1/4"/6.35MM JACK CABLE.

- POPLESS SWITCHING.

- L.E.D INDICATOR POWERED BY STANDARD 9V DC (NEGATIVE CENTER)

- CURRENT DRAW (APPROX): <0.5MA

- STANDARD 2.1MM POWER SOCKET FOR REGULAR PEDAL POWER SUPPLIES & DAISY-CHAINS. (BATTERY IS DISCONNECTED WHEN POWER JACK IS INSERTED). POWER IS FOR L.E.D.S ONLY.

- BATTERY CLIP OPTION INSIDE (POWER SAVING WHEN INPUT JACK IS ABSENT).

- SATIN VINTAGE-STYLE ACRYLIC FINISH.

- VINTAGE STYLE AMBER L.E.D INDICATOR.

- ROBUST & COMPACT DIE-CAST ALUMINIUM CHASSIS.

- FULLY SHIELDED UNIT TO ELIMINATE INTERFERENCE AND NOISE.

- INCLUDES TWO SIDES OF VELCRO FOR PEDAL BOARD MOUNTING.

- INCLUDES 9V PP3 BATTERY.

- INCLUDES FREE WORLDWIDE DELIVERY, 30 DAY SATISFACTION GUARANTEE AND ONE-YEAR WARRANTY.

- DESIGNED & BUILT IN DEVON, ENGLAND.

!!! ATTENTION !!! DO NOT USE TO CONNECT SPEAKER LINES - ONLY SUITABLE FOR INSTRUMENT & LINE LEVEL SIGNALS.

PLEASE EMAIL US STATING YOUR CHOICE OF EITHER: FACE-MOUNTED OR STANDARD (SIDE MOUNTED) JACK SOCKETS. (IF YOU DO NOT INFORM US, WE WILL CONTACT YOU BEFORE DISPATCHING THE ITEM).

PLEASE NOTE: IN THE INTEREST OF CONSTANTLY DEVELOPING & IMPROVING OUR PRODUCTS, APPEARANCE, DESIGNS & FEATURES MAY CHANGE WITHOUT NOTICE.

CREBERINSTRUMENTS.COM
Our designs have taken inspiration from the original effects that produced the most iconic sounds of the 1950s, 60s and 70s. However, our devices are far from replicas; we use absolutely no pre-made or printed circuit boards, and all circuits are our own unique design. All Creber Instruments effect pedals are designed and calibrated to produce the absolute best studio-quality tones, with the robustness required to withstand even the heaviest-footed gigging musician. All components are soldered by hand using modern high precision & quality, low-noise analog components. We have dedicated years to calibrating our designs to achieve the best sound with greater stability, compatibility and reliability. Our chassis graphics are clear and simple, with no unnecessarily fancy artwork or gimmicky terminology; unless it improves the quality of sound, we like to keep it concise and to the point, just as it was in the good old 50s & 60s. These pedals are built primarily for guitar though, as with all things musical, there are no rules, so all of our effects work well with any instrument that can be connected with a ¼ inch jack - but let your ears decide!

All C.I. effect pedals are built upon order, hand made one at a time. Please allow up to 12 working days manufacturing time, PLUS (variable) shipping time.

All C.I. products include Free World-Wide Delivery, a 30 Day Satisfaction Guarantee and a One-Year Warranty.

THANK YOU FOR YOUR INTEREST! 

FOR MORE INFO, VISIT: CREBERINSTRUMENTS.COM