BlastCraft Hardware
- Bellingham, WA, United States
- Send Message
Welcome to BlastCraft Hardware: 3D‑Printed Drum Hardware, where modern manufacturing meets extreme music. Every piece of hardware is designed, tested, and refined by hand — using high‑strength materials and real‑world drumming experience. Whether you’re upgrading your kit, customizing your setup, or solving problems traditional hardware never addressed, you’ll find parts engineered for durability, creativity, and performance.
Precision‑crafted. Stage and studio‑ready. Built to secure all variations of drum pedals and hardware to ANY surface.
New drops, upgraded designs, and limited‑run experimental parts are released semi-regularly.
Follow the shop to catch new releases the moment they land.
Play loud. Play fast. Make your kit a precise, repeatable blueprint anywhere you go!
— BlastCraft Hardware, LLC
Engineered for reliability
Shipping Policy
📦 Shipping Policy — StoneSolid Drum Hardware
Processing Time
All orders are made, inspected, and packed by hand.
• Standard processing time: 3-5 business days
• High volume periods may extend processing slightly, but we always communicate clearly if delays occur.
Shipping Rates
StoneSolid Drum Hardware uses simple, predictable rates:
• Flat Rate Shipping (U.S.): $7.99
International shipping is available to select countries. Rates are calculated at checkout based on destination and weight.
Shipping Methods
Most orders ship via:
• USPS Ground Advantage (default)
• USPS Priority Mail (upgrade available at checkout)
Tracking information is provided for all shipments.
Estimated Delivery Times
• U.S. orders: 3–10 business days after shipment
• International orders: 14–21 business days, depending on customs and local carriers
Delivery times are estimates and may vary due to carrier delays, weather, or customs processing.
Lost or Delayed Packages
If your package is delayed or appears lost:
• Initiate a USPS search request
• Replacements may be issued on a case by case basis
Incorrect Addresses
Customers are responsible for entering accurate shipping information. If an order is returned due to an incorrect address, reshipment fees may apply.
Return Policy
New Items
Not Returnable
Used & Vintage Items
Not Returnable
General Terms
Items must be returned in original, as-shipped condition with all original packaging and no signs of use. Buyer assumes responsibility for all return shipping costs unless the item was not received as described.
Tax Policies
| Region | Rate | ||||
|---|---|---|---|---|---|
| Alabama, US* | Calculated at checkout | ||||
| Alaska, US* | Calculated at checkout | ||||
| Arizona, US* | Calculated at checkout | ||||
| Arkansas, US* | Calculated at checkout | ||||
| California, US* | Calculated at checkout | ||||
| Colorado, US* | Calculated at checkout | ||||
| Connecticut, US* | Calculated at checkout | ||||
| District of Columbia, US* | Calculated at checkout | ||||
| Florida, US* | Calculated at checkout | ||||
| Georgia, US* | Calculated at checkout | ||||
| Hawaii, US* | Calculated at checkout | ||||
| Idaho, US* | Calculated at checkout | ||||
| Illinois, US* | Calculated at checkout | ||||
| Indiana, US* | Calculated at checkout | ||||
| Iowa, US* | Calculated at checkout | ||||
| Kansas, US* | Calculated at checkout | ||||
| Kentucky, US* | Calculated at checkout | ||||
| Louisiana, US* | Calculated at checkout | ||||
| Maine, US* | Calculated at checkout | ||||
| Maryland, US* | Calculated at checkout | ||||
| Massachusetts, US* | Calculated at checkout | ||||
| Michigan, US* | Calculated at checkout | ||||
| Minnesota, US* | Calculated at checkout | ||||
| Mississippi, US* | Calculated at checkout | ||||
| Missouri, US* | Calculated at checkout | ||||
| Nebraska, US* | Calculated at checkout | ||||
| Nevada, US* | Calculated at checkout | ||||
| New Jersey, US* | Calculated at checkout | ||||
| New Mexico, US* | Calculated at checkout | ||||
| New York, US* | Calculated at checkout | ||||
| North Carolina, US* | Calculated at checkout | ||||
| North Dakota, US* | Calculated at checkout | ||||
| Ohio, US* | Calculated at checkout | ||||
| Oklahoma, US* | Calculated at checkout | ||||
| Pennsylvania, US* | Calculated at checkout | ||||
| Puerto Rico, US* | Calculated at checkout | ||||
| Rhode Island, US* | Calculated at checkout | ||||
| South Carolina, US* | Calculated at checkout | ||||
| South Dakota, US* | Calculated at checkout | ||||
| Tennessee, US* | Calculated at checkout | ||||
| Texas, US* | Calculated at checkout | ||||
| Utah, US* | Calculated at checkout | ||||
| Vermont, US* | Calculated at checkout | ||||
| Virginia, US* | Calculated at checkout | ||||
| Washington, US* | Calculated at checkout | ||||
| West Virginia, US* | Calculated at checkout | ||||
| Wisconsin, US* | Calculated at checkout | ||||
| Wyoming, US* | Calculated at checkout | ||||
Manufacturers and Safety Information
🛡️ Manufacturer’s Safety Information:
BlastCraft Hardware designs and produces lightweight, durable, 3D printed components intended for use in standard drum set applications. To ensure safe operation and long product life, please review the following safety guidelines before installation or use.
⚙️ General Safety Guidelines
• BlastCraft components are engineered for non load bearing or light to moderate load applications unless otherwise specified.
• Always verify fitment and compatibility with your drum kit, pedals, stands, or accessories before use.
• Inspect parts regularly for signs of wear, cracking, deformation, or heat exposure.
• Do not modify, drill, cut, or reshape components unless the product description explicitly states they are mod friendly.
• Keep all hardware away from open flames, high heat sources, or prolonged direct sunlight, as 3D printed materials may soften or warp.
🥁 Installation & Use
• Install hardware only on stable surface (carpet, wood, laminate, etc.)
• Avoid using BlastCraft components in situations involving excessive force, such as supporting body weight, lifting heavy equipment, or securing large stage structures.
• Do not use components as safety-critical supports (e.g., overhead rigging, suspended microphones, or heavy cymbal booms).
🌡️ Environmental Considerations
• 3D printed materials may react to extreme temperatures. Recommended operating range: 32°F – 120°F (0°C – 49°C)
• Avoid leaving parts inside hot vehicles, near heaters, or under intense stage lighting for extended periods.
• Clean components with mild soap and water only. Avoid solvents, alcohol, or petroleum-based cleaners.
🔧 Maintenance & Inspection
• Check parts before each use for:
o Hairline cracks
o Layer separation
o Warping
• Replace any part showing visible wear or damage.
• Do not continue using a compromised component during rehearsals or performances.