Chiyoda-ku, Japan
About this listing
2012 Pro Series Standard Bass S4 Now in Stock!
The volume pot has been replaced. Since the original tone pot is from 2012, we've determined this is a 2012 model.The body back features two-piece basswood, known for its neutral acoustic characteristics, while the top showcases luxurious quilted maple. The neck is crafted from quartersawn maple, offering both premium feel and strength. The neck profile is an ‘Even C Slim .800-.880’, finished slightly thinner, and combined with a 10“-14” fingerboard radius, it enables stress-free, high playability. The frets are Heavy gauge nickel.
The front and center positions feature ML Standard pickups. With a DC resistance of approximately 6.4KΩ for both the neck and center positions, they deliver a juicier, hotter tone than other vintage pickups while maintaining a sparkling brilliance. The rear position houses a single-screw type ‘SSH+’. Its DC resistance is approximately 17KΩ, offering a tone design capable of covering a wide range of genres. It is crafted using hand-selected Alnico magnets and carefully chosen components. It also offers the added benefit of more prominently showcasing the body wood's characteristics. The tremolo unit is the reliable Gotoh 510, and the tuners are Suhr locking types.
The body has wipe marks, scuffs, linear scratches, and dents. The pickguard has fine, hazy-looking pick marks. There are pick marks on the left curve of the body top, visible when held up to light. Additionally, there are small, scattered impact marks on the lower right section of the body top. The lower right of the body back has rough impact marks, and the edge area has a dent accompanied by paint chipping the size of a grain of rice. There are also linear scratches on the upper part of the back contour and the lower left of the body back. There is some raised plywood visible due to paint thinning, but this is normal aging and should not be a concern. The neck back has occasional scratches made by fingernails in places. There are impact marks on the 2nd fret (1st string side) fingerboard edge and the 6th fret (5th string side). All hardware shows some wear but no significant damage.
The neck condition is fine, and the truss rod can be adjusted both tightening and loosening. The frets show no noticeable string wear and have about 50% life remaining. The current string height is set to approximately 1.5mm at the 12th fret (6th string side) and about 1.2mm at the 12th fret (1st string side).
Overall, it shows age-appropriate wear, but the body top has no noticeable damage. Due to heavy playing, the frets are about 50% worn, but it's still very playable. In the front & center positions, unlike the alder-bodied ‘Classic’, it delivers a sparkling, brilliant sound! It produces a clear, well-defined single-coil sound suitable for various genres and situations. In the rear position, it shifts to output a juicy, squishy sound while maintaining an edgy, well-defined tone that's easy to handle without being overly muddy.
【Weight】3.30kg【Neck Condition】No issues【Truss Rod】Adjustable in both tightening and loosening directions.【Fret Wear】Approximately 50% remaining【Country of Origin】Made in USA【Case】Original gig bag (※Shoulder strap damaged)【Accessories】Tremolo arm【Condition Grade】B+: Some scratches present, but no issues for normal use【Serial Number】P3750* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.* The items shown in the pictures are all the items including accessories.* If there are any problems during the final check before shipping, we will inform you separately.specsItem RankB+: Some scratches, but no problem in normal useSerial No.P3750Year of manufacture-Year of manufactureCountry of manufactureUSACaseGenuine gig case (with broken shoulder strap)AccessoriesArm, wrench, tremolo spring (1)Weight3.30kgTruss rodUp to 60‹ on the tightening sideFret remainingFret height availableString height (bass string side)2.0mm above 12th fretString height (treble string side)1.5mm above the 12th fretStrings for setupERNIE BALL 2221 / .010-.046 setModified part-Repair/MaintenanceRepair and MaintenanceCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, volume pot replacementOther-Other*** The shipping cost to most countries is included in the listed price ***All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.Accessories: Please confirm the picture.Precautions for electronic instruments that use a power supplyThe voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.Please note!We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.More information please confirm our shop policy.
PriceR$15,955.24
+ R$6,689.83 Shipping
