A special Historic-spec custom ES-335 produced during the final days of the Memphis factory.

This is one of the "Memphis Historic Series" models crafted at the Gibson Memphis factory, which closed in 2018 to much regret. This series was available for only a very short time following the discontinuation of the Nashville Historic Collection, and it boasts a high level of craftsmanship that could be described as the "Historic Series" dedicated to semi-hollow body guitars.
The elegant grain, which shimmers subtly depending on the angle, is beautiful and exudes a vintage-like sense of luxury distinct from flashiness.

Based on the 1961 ES-335 specifications, it features the dot position marks seen from 1958 through early 1962. It is equipped with Kluson tuners?the double-knob, single-line style known from models dating from the late 1960s onward.
The neck features a slim taper profile that offers excellent playability, allowing you to fully enjoy the light, responsive feel characteristic of early ES-335s.
Meanwhile, the pickguard incorporates the short guard seen on later 1963 models, recreating details unique to this transitional period.
This gdot inlays ~ short pickguardh combination is known as a specification found only during a very limited period around 1961 and early 1962, making it an irresistible feature even for vintage ES-335 enthusiasts with deep knowledge of the model.
Additionally, starting around 1962, the ES-335 featured new routing near the rear pickup, increasing the cavity volume and resulting in a sound with a more airy quality. This model deliberately incorporates this routing to fully enhance the body resonance.
The model designation on the certificate of authenticity is "HS18CO4NH1."

With the closure of the Memphis factory, this is a rare ES-335 that allows you to fully appreciate the unique character of the gfinal-era Memphis Historich?a model that will never be produced again.
The nut has been replaced, and there is some fading of the neck finish, as well as paint damage around the F-hole on the control side.
There are also minor play marks, scuffs, and some discoloration on the parts, showing signs of use.
It has been cleaned and fully adjusted since arrival.
Condition: B+: Some scratches, but no issues for normal use

Serial Number: 70585
Country of Manufacture: USA
Case: Hard Case
Accessories: Certificate of Authenticity
Weight: 3.43 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 43.49 mm
Neck thickness near the 1st fret: 20.12 mm
Neck thickness near the 12th fret: 23.30 mm
Scale: 628mm (24.75")
Radius: 305mm (12")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Work Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fretting, nut adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.

* This is a one-of-a-kind item currently listed simultaneously on multiple platforms, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your country

We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.

More information please confirm our shop policy.