Here is a limited run very special Gibson from the Custom Shop. Only 50 made. Gold mist finish, coil split, killswitch, reverse/phase, it is all in here originally built from Gibson. It's a Les Paul Standard Custom Pro. The Les Paul Custom Pro from Gibson Custom, you find a deceptively cunning switching array powered by two of Gibson's most impressive pickups. The BurstBucker 2 in the neck position and BurstBucker 3 in the bridge are crafted in the image of the original PAF humbuckers of the late '50s, with unpolished Alnico II magnets and unevenly wound coils for that characteristic edge and bite heard in great vintage pickups. Each pickup has been wound with four-conductor wire to enable a complex array of switching possibilities. Push-pull switches on each pickup's independent volume pot provides coil splitting for convincing single-coil sounds, while the bridge pickup's push-pull tone control provides reverse-phase switching, and the neck pickup's tone pot doubles as a useful "kill switch." Add it all up, and there's a startling array of tonal options from this straightforward-looking Les Paul. It's all anchored by the legendary pairing of a nickel-plated ABR-1 Tune-o-matic bridge and nickel-plated stopbar tailpiece, with high-performance kidney button Grover tuners to keep you tight and in tune. The guitar has some finish checking in the nitro finish on some spots, but no cracks or repairs. COA, checklist and original case are included. The weight is 4,7kg.