Hello and welcome to The House of Chrome.

 You are looking at a classic 2nd generation (1960's era) Electro Voice 664 dynamic cardioid microphone. Often referred to as "The Buchanan Hammer" salesman would demonstrate it's toughness and reliability by pounding nails into a piece wood with the mic then hooking it up to show that it would still work without issue. This microphone was not used as a hammer...obviously and shows extremely lite wear from use over the decades. It comes with a longer cable in which to operate as well as the metal case in which to store.

 Pic # 2 shows the 664 along with several other very popular E.V models and their basic characteristics.

 It should be noted right away that though the mic is 100% complete. It has been tested and works like new with zero issues. It's best used as a vocal mic for singing and broadcasting as it was intended but this is a High Impedance mic. More on that in a second.

 The 664 was a revolutionary, high quality studio mic being tough, reliable, great sounding and having a uni-directional pattern only picking up what was directly in front of the microphone cancelling out all background noise. It was the standard for all other mics of it's era and sounds as good as most quality mics built today if the 664 is in good working order but being that this mic is Hi Z it's basically void of bass. This mic will give you that old school "rockabilly" tone that you'd hear from the 40 and 50's. If you want a 664 with warm tone and bass then you want to get a Low Z 664.

 A lot of audio equipment back in the day had the Hi Z inputs like a HAM radio or guitar amp and so this Hi Z 664 was compatible for that. The E.V 664 is a dual Z mic and technically it could be wired for either or but almost every 664 sold was factory set at either Hi Z or Low Z so just because you build a cable to one or the other doesn't mean that it will work on your 664. Foe example, this Hi Z 664 will not work with a Low Z 4 pin cable because the Hi Z setting on the mic is from the wiring being set at Hi Z within the mic itself. I hope you understand?

 I get a lot of people asking me about this so if you buy a 664 make sure you understand which setting you are getting because the Hi Z and Low Z 664 mics have completely different tones to them.

 The polished chrome body on this 664 shows very lite wear in the form of very lite pitting but otherwise quite beautiful. The 664 label looks very nice with almost no wear and completely legible. The front screen is free of odors, tarnish or deformation. A new inner pop filter was installed as well. The on / off switch works perfect as well. 

 The joint mechanism works perfectly with plenty of tension and it's adjustable via side screw. The on / off switch was cleaned and works just as it should and slides smoothly. The threading for the cable and stand are perfect...nothing stripped or fractured. 

 I would rate this mic a very conservative 8 + physically speaking on a scale of 1 - 10. They rarely come this nice.

 There is a longer 20 foot cable included that's soft, pliable and in excellent condition with the standard male XLR end connector. Great for stage and studio work.

 There is the beautiful vintage metal case in which to store your items. The case has a practical carrying handle and locking mechanism. It has the original mustard yellow paint paint scheme. I added two new foam inner pads to keep the mic safe and snug. It's a very rugged design and compliments the mic nicely. Plenty of room inside for everything. The case shows almost no wear on the paint. Zero dents or corrosion but the handle is partially fractured. Still works though. It's a great accessory to have to keep these items safe from damage.

 If you need something special to use for the daily...this will certainly do you justice.

 The 664 will screw onto any desk or floor stand you choose. I would seriously suggest using a heavy desk or floor stand as this mic is very top heavy. If you need something that compatible please just ask and I'll show you what I have in my store.

      MICROPHONE STAND SHOWN IS NOT PART OF THIS SALE...USED FOR DISPLAY PURPOSES ONLY. 

             As with all my other vintage microphones...

 I can promise you will be happy with it for the price paid. If not...I have a no hassle return policy. The return shipping will be on you as I believe that's fair but the purchase price would be refunded. Simply return in the same nice condition...period. Check my rating. International buyers are welcome as well. BUYER MUST PAY WITHIN 24 HOURS or will lose rights to this item, unpaid item report will be filed and will be relisted. If you don't intend on buying this...do not commit to buy please. Domestic buyer will get priority shipping.

  If you have any questions feel free to ask and...thanks for looking.