DENSEN BEAT B 100 INTEGRATED AMPLIFIER MADE IN DENMARK AUDIOPHILE VINTAGE 60W

Based on the DM-10 , the BEAT -100 was designed to bring you the best qualities of the DM-10 at a much lower price. The BEAT-100 is a true non-feedback amplifier, and contains designer goodies like Alps potentiometer, massive toroidal transformer, custom made capacitors, doublesided teflon PCB and goldplated in-and output terminals. The circuit is optimized for SMD (surface mounted devices) , and the transistors, capacitors and resistors are all measured before mounting, to obtain the highest precision. 

The Beat 100 features a class-A/B direct-coupled complementary topology, all bipolar solid-state.

60W at 8 Ohm
120W at 4 Ohm
Powersupply size : 360VA
Storage Capacity: 40,000uF
THD + Noise@ rated output:Less than 0.01%
Frequency Response(+0-3db):2-200,000Hz
Weight: approx 25lb
Dimensions: 17.5"x12.25"x2.5"
2 sets of speaker terminals so bi-wiring is possible. 
5 RCA line inputs . Note this unit does not have the phono preamp upgrade installed 
Tape in/out. 
Preamp out.

Note that the plastic positive terminal screw on one speaker channel connector is missing.

This unit was used regularly for over 20 years, and was kept powered ON almost the entire time. It is an amazing amplifier and has a wonderful musicality and toe tapping rhythmic presence that makes it hard to replace for the money. 

Front controls are simple volume and channel selector. 

Note that over time the volume pot became less effective , and the dial needs to be turned higher to achieve the same volume as when the unit was new. 

The amp works and will power any standard stereo setup and sound good, but could use maintenance to be brought back to spec if the buyer desires.

Since it was powered on and remained hot, the original feet melted off. plastic risers were placed underneath, and they left gummy residue and stains/discoloration
There is wear and tear to the outer case, and a few screws for the case are missing from the bottom. 

Examine photos for details/condition

Item will be well-packed and shipped with Reverb Protection

I will include some paperwork related to the amp (spec sheet etc)