Audio Technica AT-LP7X Fully Manual Belt-Drive Turntable+Monitors+Headphones

Package Includes:

• (1) Audio Technica AT-LP7X Fully Manual Belt-Drive Turntable+RCA Cable+Adapter+Cover
• (1) Pair Rockville ASM4 4" Pro Studio Monitor Computer Speakers w/Bluetooth+Optical
• (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad

Description:

The AT-LP7X fully manual belt-drive turntable blends analog excellence with style and versatility. Featuring a dense MDF plinth and acrylic platter to minimize unwanted resonance and vibration, this elegant, matte-black turntable delivers sound that’s just as clean and refined as its appearance.

In designing the LP7X, we paid special attention to chassis geometry, ensuring that the platter, spindle, and tonearm were optimally positioned for accurate, distortion-free tracking. The J-shaped aluminum tonearm, inspired by classic A-T models of the 1960s and ’70s, features a dual-axis gimbal with precision ball bearings to further enhance tracking performance.

The turntable comes with our AT-LT10 headshell and AT-VM95E BK (black) cartridge with 0.3 x 0.7 mil elliptical stylus, providing excellent channel separation and low distortion for outstanding tonal quality. For easy customization, the stylus can be replaced or interchanged with other styli in the VM95 line, offering a wide choice of options for every budget and application.

The AT-LP7X is ideal for those interested in experimenting with alternate cartridges. The tonearm’s VTA (vertical tracking angle) adjustment and 16 g subcounterweight allow you to use a broad range of other cartridges and headshells with a combined weight of up to 23.5 g. (A 32 g subcounterweight, available separately, enables the use of even heavier cartridge/headshell combinations.) With its built-in switchable phono pre-amplifier, the AT-LP7X also gives you the option of using MC (moving coil) cartridges.

The turntable’s 20 mm acrylic platter is driven by an optical sensor-monitored motor that ensures a continuously accurate platter rotation speed of 33-1/3 or 45 RPM. The motor is mounted on vibration-dampening rubber bushings designed to decouple the motor from the plinth, minimizing the transmission of mechanical noise and oscillations. An external switching power supply isolates the AC-to-DC conversion to prevent it from adding any electrical interference, and the turntable’s spring-based, height-adjustable isolation feet offer excellent protection against external noise.

The AT-LP7X comes with a detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable dust cover.

Modules: Refine Your Sound
Versatile Cartridge Configuration Combined, the turntable’s AT-VM95 cartridge, VTA (vertical tracking angle) adjustment, and 16 g sub counterweight expand your configuration options. Upgrade to a more refined VM95 stylus or experiment with different cartridge/headshell combinations (up to 23.5 g total). Add the optional 32 g sub counterweight (available separately) and work with combinations up to 28.5 g.

Clean, Quiet Playback: Acrylic Platter
The high-density acrylic platter dampens vibrations for supremely quiet playback, allowing the brilliance and detail of your vinyl records to shine through.

Low-Friction Spindle + Sensor-Monitored Motor: Smooth, Accurate Rotation
The stainless-steel spindle features a thermal-plastic, sheet-type bearing at its base, ensuring low-friction rotation that’s precisely maintained at 33-1/3 or 45 RPM by the turntable’s speed-sensor system.

Precise Turntable Geometry: Excellent Tracking
The chassis and tonearm geometry of the AT-LP7X have been designed to ensure optimal lateral tracking for distortion-free playback.

Features:

• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Heavy 40 mm MDF (medium density fiberboard) cabinet construction reduces resonance and vibration for clearer sound
• Motor features a speed-sensor system to maintain accurate platter rotation speed
• 20 mm-thick, high-density acrylic platter offers high rotational inertia to spin records at a consistent speed (no platter mat required)
• J-shaped tonearm with adjustable VTA (vertical tracking angle)
• AT-VM95E BK (black) cartridge (0.3 x 0.7 mil elliptical stylus) pre-mounted to the lightweight AT-LT10 removable headshell
• AT-VM95 cartridge is compatible with most VM95 Series replacement styli, offering a wide choice of options for every budget and application
• Included 16 g subcounterweight provides an expanded cartridge/headshell weight range of 14.0–23.5 g
• A larger 32 g subcounterweight is available separately to enable the use of cartridge/headshell combinations up to 28.5 g
• Adjustable anti-skate control to counter the inward force the styli experiences during playback
• Built-in switchable phono pre-amplifier with selectable modes for MM (moving magnet) or MC (moving coil) cartridges
• Includes dual RCA (male) to dual RCA (male) stereo cable with ground, 45 RPM adapter, and removable dust cover

Specifications:

• Turntable specifications:
  
  • Motor: DC servo motor
  • Drive method: Belt drive
  • Speeds: 33-1/3 RPM, 45 RPM
  • Turntable platter: 20 mm (0.79") thick acrylic platter
  • Wow and flutter: < 0.1% (WTD) at 3 kHz (JIS)
  • Signal-to-noise ratio: > 60 dB
• Output levels:
  
  • PHONO: 4.0 mV nominal at 1 kHz, 5cm/sec
  • LINE: 252 mV nominal at 1 kHz, 5cm/sec
• Phono Pre-amp gain:
  
  • MM: 36 dB nominal, RIAA equalized
  • MC: 56 dB nominal, RIAA equalized
  • Operation: Fully manual
  • Tonearm: J-shaped; 247 mm
• Built-in MC Preamp
• Maximum Tracking Error Angle: Less than 2 degrees
• Applicable Cartridge Weight (including headshell): 14 to 28.5 g (when using subcounterweight)
• Tonearm Overhang: 15 mm
• Tracking Force Range: 0 - 4 g
• Included Cartridge: AT-VM95E
• Included Headshell: AT-LT10
• Adjustable VTA
• Weight: 7.6 kg (17 lbs.)

All About Your ASM4:

How To Set Up Your ASM4 Speakers:

How To Set Up Your ASM4 Speakers to an Audio Interface:

How To Set Up the Optical Input on Your ASM4:

What's in the box:

• Power Cable
• 3.5mm to dual RCA cable
• Speaker Cable
• Owner’s Manual

Description:

The Rockville ASM4 Active Studio Monitors were designed and engineered to be your go-to speakers for studio monitoring and entertainment. This is tuned to give a flat and balanced frequency response which also makes it the perfect computer speakers.

This speaker system provides full range monitoring accuracy with good bass down to 50Hz.

This speaker was DSP tuned by the Rockville development team. We compared it to the top studio monitors on the market and we made sure that we out-perform anything in our price range.

The Neodymium silk dome tweeters give smooth highs while our efficient woofer and rear bass port provide clear mids and lows.

We added Bluetooth playback so you can use these for entertainment in addition to studio monitoring. We also added an optical input so you can connect these to your TV or other digital source. The left and right ¼" TS jacks will allow you to connect any pro audio source such as a mixer, interface, etc.

Features:

• Rockville ASM4 4" 2-Way 200 Watt Active/Powered Pair of Studio Monitor Speakers with Bluetooth
• 200w Peak output / 50 Watts RMS
• 4" Woofer with efficient paper cone and rubber surround
• 1" Silk dome tweeter
• ½" MDF enclosure with rear firing port for enhanced low frequencies
• DSP tuned with a flat and balanced frequency response
• Built in Bluetooth playback with 35 foot range
• Optical input to connect to your TV or other digital source
• Left and Right ¼" TS input for any pro audio sources (mixer, interface, etc)
• RCA aux input
• 3.5MM aux input
• Bluetooth version 5.0
• Full Range Class D Amplifier Circuitry
• LED Power on Indicator
• Rotary Front Volume Control
• Curved Front Bezel Design Eliminates Standing Wave Distortion

Specifications:

• Frequency response: 50Hz - 20 kHz
• Total speaker power output: 50 Watts RMS / 200 Watts PEAK
• Input impedance (Ohms): 10 K Ohm Balanced
• AC power input: 110/240 auto-switching
• Cabinet finish: Black
• Dimensions of each speaker (H x W x D): 10.35" (263mm) x 5.91" (150mm) x 8.86" (225mm)
• Weight of the pair of speakers: 12.6 lbs. (5.7kg)

Includes:

• PRO-M50 headphones
• Detachable cable
• Soft suede and leather ear cushions (interchangeable)
• Leather hard travel protective case
• Gold plated ¼" adapter

All About Your PRO-M50:

Description:

Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to our perform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!

Features:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case + Extra Ear Pad
• Professional High-Definition Studio Headphones
• 40mm Neodymium drivers
• Ergonomically designed swivel ear cups
• Supreme sound isolation
• Accurate sound reproduction
• Minimal bleed
• Sturdy and durable steel headband and arms
• Soft leather headband cover
• Interchangeable leather and soft suede ear cups covers included
• Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
• Gold plated 3.5mm connector
• Gold plated ¼" adapter
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting

Specifications:

• Style: Closed-Back
• Design: Circumaural
• Transducer type: Dynamic
• Driver: 40MM
• Sensitivity: 97±3dB
• Impedance: 32ohm
• Frequency response: 10Hz - 25KHz
• Max. power: 600MW
• Rating power: 260MW
• Net weight: 290g (with cable)