The Bends V2 is an analog compressor and boost pedal designed for smooth, low-noise dynamic control on guitar or bass. It uses a unique take on OTA technology for real-time gain control, helping balance louder and quieter passages while adding sustain, thickness, and a more controlled feel under the hands.

The compression side keeps the layout simple with a three-speed Attack switch, fine-tuned Release control, and Input control for setting the level that triggers compression. A Compression LED gives a clear visual indicator when the circuit is working, making it easier to dial in the amount of response you want.

An active Tone control with a center detent lets you cut or boost treble to keep the signal clear, while the Blend control mixes clean signal back in for a natural balance of dynamics and compression. That makes the Bends V2 especially useful when you want sustain and control without flattening the entire feel of the instrument.

A rear-mounted Vintage switch reshapes the compression character from crisp and precise to smoother and more colored, with a touch of natural saturation. It gives the pedal two distinct personalities without making the controls complicated.

The independent ultra-clean boost can be placed before or after the compressor with the Comp Pre/Post switch. Put the boost before compression for extra sustain and compression push, or place it after the compressor for a level lift into the rest of your signal chain.

With switchable true or buffered bypass, relay-based auto-bypass, multiswitch-enabled footswitch behavior, and a practical compressor/boost layout, the Bends V2 is a strong utility pedal for adding control, sustain, and clean level boost to any board.

Highlights

• Analog compressor and boost pedal
• Low-noise compression circuit
• Guitar and bass friendly
• OTA-based real-time gain control
• Three-speed Attack switch
• Fine-tuned Release control
• Input control for compression trigger level
• Active Tone control with center detent
• Blend control for mixing clean signal with compression
• Rear-mounted Vintage switch for alternate compression character
• Independent ultra-clean boost circuit
• Boost can be placed before or after compression
• Compression LED indicator
• Switchable true or buffered bypass
• Momentary or latching footswitch operation

Specifications

Controls

• Input: Sets the input level that triggers compression
• Release: Adjusts compression release response
• Tone: Active treble cut or boost with center detent
• Blend: Mixes clean signal with compressed signal

Switching

• Attack Switch: Selects between three attack speeds
• Vintage Switch: Changes the compression character from modern and precise to smoother and more colored
• Comp Pre/Post Switch: Places the boost before or after the compressor
• Compression Footswitch: Engages or bypasses the compressor circuit
• Boost Footswitch: Engages or bypasses the independent boost circuit
• Bypass Modes: Switchable True Bypass or Buffered Bypass
• Footswitch Behavior: Rear-panel multiswitch for latching or momentary operation
• Auto-Bypass: Relay-based auto-bypass when no power is present

Power

• Power Requirement: 9V Center Negative AC Adapter
• Power Supply: Not Included

Miscellaneous

• Type: Compressor/Boost Pedal
• Compression Circuit: Analog, OTA-Based
• Suitable For: Guitar and Bass
• Indicator: Compression LED

Why Buy from Tone Shop Guitars?

At Tone Shop Guitars, we bring in pedals that are useful, inspiring, and built to earn a spot on your board. Every piece of gear we carry is chosen for sound, build quality, and real-world musical value. When you buy from Tone Shop, you’re getting something we would be excited to plug in ourselves.