Warmoth Telecaster Baritone Custom - Fishman Modern Pickup - Hipshot Hardware

Warmoth Baritone Telecaster

Custom Build

28-5/8" Scale Length

Fishman Modern

Voice 1 Pot Down

Voice 3 (Single Coil) Pull Pot Up

Hipshot Open Gear Locking Tuners

Hipshot Fixed Bridge

Body Has A Pristine Gloss Black Finish

Solid Alder

Stratocaster neck pocket cutout to be used with any Stratocaster stock or replacement neck

Both the bridge and the neck pickup spots are routed for humbuckers. Upper routing is just covered by the pickguard. So you are able to add a Neck Pickup if you wish to do so.

(For A New Pickguard, call Warmoth and ask for Stratocaster a neck Pocket cutout, and ask for Both Humbucker Cutouts)

The top/neck pickup routing is for Direct Mount to Wood, so you will either need to use shorter screws, or drill two holes where the screws will fit in, to allow them to go down far enough. Very easily figured out.

Tiltback Baritone Neck is Plain Maple with a very (very) thin Tru Oil Finish.

Reverse Headstock.

Solid Black Ebony Fretboard

24 Jumbo Stainless Frets

Frets have been professionally leveled and crowned by a Luthier

10"-16" Compound Radius

The headstock is not painted, it has an adhesive black gloss vinyl wrap which can be very easily taken off, underneath the vinyl wrap is bare unfinished maple which is ready for paint or finish

43mm Modern Medium Tusq XL Nut

(Will included a brand new Tusq XL Nut, if you want to use, string slots are pre-cut, although you will have to file the correct shape)

This is overall a fantastic custom built guitar. Clean tones, Metal tones, and everything in between. The finish on it is great. The frets were leveled perfectly so it can be setup and played with very low action. I just do not have room for this in my collection anymore, and I hope to find somebody who will get good use from it.