This amp looks to be in near new condition. Footswitch not included.

Variation between 25, 50 and 100 watts of power. Vatiation between 4, 16 and 8 ohms, effects loop and built in reverb. Master volume: Controls output of all 3 channels. Boost or cut your entire rig with one control. - Boost: Add up to 9 dB of volume boost, switch it on/off via the FS44 footswitch and MIDI. - Bright: Boost highs starting at 5kHz for added clarity. - Mid Cut: A unique mid cut helps dial in a master scooped tone from mild to extreme. - Deep: Adds low frequencies at the sub-harmonic level - Reverb: Assignable to any channel. - Smart Loops™: Total control of your effects, remembers your effects loop settings for each channel. Just assign a loop(s) to the current channel, Smart Loops permanently saves it until you change it. Channel 1 & 2 Overdrive 3 Drive Modes: a) "Center" - a classic rich, open overdrive with lots of headroom. Turning up the Drive knob adds sustain and warmth. b) "Thick" - brings on the chunk with a massive low-end, textured mids and blistering highs. Turning up the Drive knob adds sustain to the highs, grit to the mids with low-end bark. c) "Intense"- the most gain and sustain with notes that leap out with startling articulation. The low-end is deep and percussive. Mids and highs smoothly blend and still cut through. Turning up the Drive stretches the envelope of sustain to the edge. EQX: Toggle between standard EQ and Expanded EQ. This switch opens a wider frequency range for the TREBLE and BASS. Presence: Boosting 8kHz to help cut through. Channel 3 Clean 3 Drive Modes: a) "Center" - a classic rich, open clean sound with lots of headroom. Turning up the drive adds tube warmth and sag. b) "Bright" - adds high end to the preamp, inviting high frequencies to chime and sustain as the Drive is turned up. EQX: Toggle between standard EQ and Expanded EQ. This switch opens a wider frequency range for the TREBLE, MID and BASS. Presence: Boost 11kHz for glassy, shimmering highs.