• The FV01 vocal effects Corrector is primarily a pitch-correction pedal that offers everything from pitch correction to full-blown effects overload when your input is a microphone.
• The FV01 features three separate vocal effects as indicated by the TONE LED displayed prominently in the center of the pedal.
• Singers can switch between WARM, BRIGHT, and NORMAL modes, with each mode indicating the type of EQ manipulation provided by the pedal.
• It can be used as a microphone amplifier or a traditional stompbox. Optional 48V phantom power for condenser microphones.
• Two different output modes for a mixed-signal or individual signals from guitar and microphone.

Main Features

As the name suggests, the FV01 vocal effects Corrector is primarily a pitch-correction pedal that offers everything from pitch correction to full-blown effects overload when your input is a microphone. Starting with the vocal effects, the FV01 features three separate vocal effects as indicated by the TONE LED displayed prominently in the center of the pedal. Singers can switch between WARM, BRIGHT, and NORMAL modes, with each mode indicating the type of EQ manipulation provided by the pedal.

1. Precise pitch correction effect for clean, even tone.
2. High-quality delay and reverb specifically designed for vocal performance.
3. Built-in TAP TEMPO feature to set the timing of delay effects.
4. Three unique vocal tone settings to choose from.
5. Guitar in/out with individual guitar reverb effect.
6. Can be used as a microphone amplifier or a traditional stompbox.
7. Optional 48V phantom power for condenser microphones.
8. Two different output modes for mixed signal or individual signal from guitar and microphone.

Output Modes

Individual mode

the guitar signal will only go from GUITAR OUT and the microphone signal will only go from XLR OUT.

Mixed mode:

The guitar and microphone signal will be mixed and the mixed signal will go out from both the GUITAR OUT and XLR OUT.

Switch Between Modes

Unplug the power supply. Press and hold teh footswitch while powering on the pedal. The TONE LED and footswitch LED will blink in red to indicate that the mode has changed.