12" SPEAKERS GUITAR/ BASS GUITAR SPEAKERS SUNN MUSIC MAN M12X HIGH EXCURSION TWO AVAILABLE

*********SEE MY OTHER LISTINGS/ SEE FULL DESCRIPTION**********

*Up for grabs are these two SUNN / MUSIC MAN 12" guitar / bass guitar/ PA speakers

* Each purchase is for a single unit/ 2 available*

*NOTE- I listed these as " B-Stock", so that I could offer 2 units, as well as there is no item condition for " Completely Re-Fabricated/ Like New" option....

I may have listed these a week or 2 too soon, as one of the Eastman Kodak prep chemicals leaked into the fibers as it always does.... more on that in a minute..but, it's drying out..

These 2 were recently re-fabricated at PMR in Ohio with all new OEM/ AMERICAN components.

We recently acquired these in worn out condition, and I just knew what HAAAD to be done.

If you like rock/metal, these are a KILLER 12".... high power, high SPL levels, these play LOW, and built like tanks.

They were all stripped down to bare metal, and repainted so they look as good as they sound..

Then, all new OEM/ AMERICAN parts were used. There are no after market, replacement, India made crap, or import chyna junk in these, but only AMERICAN made components

Fellas', even if you don't buy from, me- BUY AMERICAN!

I'll itemize:

*Frames- heavy stamped steel

*Magnetic composition- 2 bolt ceramic

*Pole plate thickness- .375!
*hook up- standard spade terminals

*Litz wires- copper .050"

*Spider assemblies- treated textile/ high compliance cupped profile

*Voice coil formers- Radially vented aluminum former

*Voice coil diameter- 1.550"

*Voice coil impedance- 8 Ohms

*Dust caps- 3" aluminum/ lip down (JBL)

*Cone- all paper seamed cones

*Cone profile- straight/conical profile/ fully ribbed

*Cone weight- 12.5 grams/ neck dipped

*Surround- Treated with clear tacky/never completely dry dampeners, (Eastman Kodak, and ReZon-ex)

*Front mounting gaskets- chip/repressed 4/8 hole mounting pattern

*Power- 70 watts

*Impedance 8 ohms

*SPL- 96dB

*Response- 42Hz- 6.8Khz

That'll give you guys a good idea of what she'll do...

Those monstrously powerful magnets, along with a 1.5"" diameter voice coil, and pole plates that are 3/8 INCH THICK provide a lot of cross sectional area onto the coil windings to create a lot of horsepower. People talk about the V30 being a monster, which they are BUT- these sound SOO much better, so much livelier, much better detail, faster impulse, higher top end, and aren't dark sounding.

On clean channel these brutes excel... I posted them for metal use, but with the clean channel you'll notice a nice high top end and without that "Ice-Pick" tonality. These are slightly woody, with a LITTLE chime/bell to them, but not excessive.. That tacky edge treatment allows these to sound the same at low AND higher volumes....

Now, with a fuzz/distorted channel, these things ARE metal monsters! GREAT for controlled feedback, and all of you drop tuning/7 string players...If I find a 4th one to rebuild, I'm yanking this posting and keeping them for a slant top half stack...

Now- about that " staining" on the edge...

There are FOUR chemicals applied to the surrounds in order to loosen up the fibers in that area to allow an all paper cone to have the excursion that these provide. One of the prep chemicals was applied too heavily, and it leached into the cone. This is NOT the softener itself, but a prep chemical, and it will evaporate and dry up in a month or so.. The actual softener is ONLY on the surround, and THEN - the ReZon-Ex was applied over that, so it will dry out clear back to the black shiny part of the surround..

Fully tested and operate flawlessly...

Plus, I'm confident enough that you will LOVE these units, that I'm including my 15 day "NO GAMBLE" return option from delivery date (((less customer damage))) if for ANY REASON you simply don't like what you just bought, or you disagree with ANY of what I just typed!!!...

So, if you need a Music Mann/ Sunn type 12" for original replacements, or just want one hell of a 12" savage- then here ya' go!

ANY questions or concerns- just ask.

THANKS GUYS!