JENSEN P10 ALNICO GUITAR SPEAKER 2 AVAILABLE REBUILT AT PMR IN OHIO AMERICAN COMPONENTS

*****************SEE MY OTHER LISTINGS!!!!***************

Up for grabs is this/ are these Jensen P10 type 10" guitar speakers

*** EACH PURCHASE IS FOR A SINGLE/ 2 AVAILABLE****

* NOTE- (I posted these as B-Stock, so that I can offer more than one, and there's no option for " Completely rebuilt/ Like-new", I had to do this, but read on for full description on condition)

The reason I am listing them this way/ individually instead of a pair , is there is only ONE difference between them, and if I didn't mention it, you'd probably never know...I'll tell you shortly what that difference is...each purchase is for your choice/ 2 available if you want 2 at this time...

BOTH were just refabricated at PMR in Ohio with all new OEM/ AMERICAN components.... There are no after market, replacement, Import, or chyna crap parts in them, but ONLY AMERICAN made components.

...... Fellas', even if you don't buy from me- BUY AMERICAN!!!

The frames were stripped down to bare metal, and then resurfaced in that black/ durable/ slightly textured. " HAMMER-ITE" finish, so they look as great as they sound...

I'll do a break down of each part used, then explain the ONE difference between these that actually makes them a BETTER matched pair gif you buy both of them...

A pair built like this on purpose doesn't turn top very often at all...

Here we go:

*Frames- stamped steel

*Magnetic composition- ALNICO VII

*Litz wires- COPPER Litz wires

*Spiders- treated textile/ cupped profile/ high compliance

*Voice coils- 1.5" diameter ( more on that later)

*Impedance- 8 Ohms each

*Power- 30-40 watts or so...

*Response- 70Hz- 7Khz

*Front mounting gaskets- OEM/ natural tan repressed chip\

*Dust Caps- repressed pulp/ center vented

*Cones- full paper body all paper seamed cones

*Neck dipped- YES

*Hook Up- standard spade terminals

That'll give you an idea of what's inside and what these sound like,..

Now,that ONE difference...

As I mentioned, all components are the exact same, but--- what I did on purpose, was I built one unit with the paper/ nome voice coil former, and the other one, I built with a light weight ALUMINUM former voice coil......

Think of them in the same tonality family, but barely different... sort of the same DNA but barely different.... sort of like cousins of each other...

You can BARELY hear a SLIGHT difference, but it's so ever slight, that you'd have to be told ahead of time, and then A/B them a half dozen times to see what I'm getting at .

BOTH have that Jensen P10 tonality, quite powerful actually for a 10" speaker... great low end that's tight, superb midrange detail and presentation that is quite 3D, and a high end that's usable and without the usual " Eye -Squint", or " Ice-Pick" tonality, these are very " steerable" speakers, easily controlled with just the tone or volume knob....

First come- first served on the preference of which voice coil you prefer, or buy them both to get the ultimate "Power-Vintage" 210 set up, that you can get variances in tonality simply by where you place the FOH/ recording mic between them, or off to one side or the other to see the slight performance differences...

These are basically new speakers again, probably BETTER Than new, and have absolutely no rubbing,m buzzing, holes, smoking, rips, tears or other issues, they both operate flawlessly...

And- I'm confident enough that you'll LOVE these, that I am including my 15 day " NO GAMBLE" return option from delivery date (((less customer damage))) if for ANY REASON you simply don't like what you just bought.....

So, iff you want that old "Power-Vintage" Jensen tonality, but don't want to spend E bay pricing at 500 each, then here ya' go!

ANY questions or concerns, just ask.

THANKS GUYS!