Seismic Audio GH10M - Pair of 10 Inch Passive Wedge Floor / Stage Monitors 300 Watts RMS - PA/DJ Stage, Studio, Live Sound 10 Inch Monitors

When you're on stage and can't hear yourself, everything falls apart. The GH10M wedge monitors solve that problem with a straightforward approach: 300 watts RMS of clean power handling per cabinet, a 10-inch woofer that punches through the mix, and a 1-inch horn tweeter that keeps vocals intelligible without being harsh.

These are passive monitors, which means you need an amp to drive them. That's actually a good thing — you get to choose your power source, whether it's a dedicated monitor amp, your powered mixer's monitor outs, or spare channels from your main power amp. At 8 ohms each, they play nice with most gear, and you can daisy-chain them if you need more coverage.

The wedge angle gets sound up to your ears while minimizing feedback, and the 45Hz-20kHz frequency response covers everything you need to hear on stage. The ribbed cone woofer delivers solid midrange presence for vocals and instruments, while the horn tweeter spreads sound wide enough that you don't have to stand in one exact spot to hear yourself clearly.

At 21 pounds each with built-in handles, they're easy enough for one person to move but substantial enough to stay put when you're moving around on stage. The MDF cabinet with aviation-grade carpet covering takes the usual abuse of load-ins and tear-downs without showing wear.

Bottom line: If you need reliable stage monitors that work with your existing amplification and don't break the budget, these deliver clear monitoring for small to medium venues without unnecessary complications.

Technical Specifications

• Model: GH10M
• Contents: Pair of 10 Inch Wedge Floor Monitors
• Type: Passive
• Power Rating: 300 Watts RMS / 600 Watts Peak (each)
• Impedance: 8 Ohms
• Woofer: 10 Inch High Output Mid/Low Ribbed Cone
• Tweeter: 1 Inch Wide Dispersion Horn Tweeter (75W)
• Frequency Response: 45 Hz to 20 kHz
• Sensitivity: 95 dB
• Connectors: 1/4 Inch TS and Raw Speaker Wire Terminals
• Dimensions (H×W×D): 18.5" × 12.5" × 12" (each)
• Weight: 21 lbs (each)
• Cabinet: MDF with Aviation Grade Carpet
• Recommended For: Stage monitoring, DJ booths, small-medium venues

Frequently Asked Questions

What amp power do I need for these monitors?

You'll want 200-400 watts per channel at 8 ohms. This gives you clean headroom without pushing the monitors past their 300-watt RMS rating. Most powered mixers with monitor sends will drive them fine, or you can use a dedicated monitor amp or spare channels from your main power amp.

Can I connect multiple monitors to one amp channel?

Yes, you can parallel two 8-ohm monitors to get a 4-ohm load, which most amps handle without issues. Just check your amp's minimum impedance spec first, and use proper gauge speaker wire for your cable runs. Three or more monitors will drop you to 2.67 ohms or lower, which many amps can't handle safely.

How do these work for different instruments?

They work well for vocals and most instruments. The 45Hz low end is solid for guitar and keys, though bass players might want something with deeper extension or a sub. The horn tweeter keeps vocals clear without being painful when you're standing close. For drums, they're better for vocals than for hearing your full kit.

Are these loud enough for outdoor gigs?

For small outdoor venues with 100-200 people, yes. The 95dB sensitivity means they're efficient and get loud without needing massive power. For larger outdoor spaces or windy conditions where sound gets carried away, you'll want more monitors or higher-powered cabinets.