Seismic Audio GH10M - 10 Inch Passive Wedge Floor / Stage Monitor 300 Watts RMS - PA/DJ Stage, Studio, Live Sound 10 Inch Monitor

When you're on stage and can't hear yourself over the drum kit, the GH10M puts your vocals and instruments right back where you need them. This passive wedge monitor gets the job done for club gigs, worship services, and rehearsal spaces without breaking the bank or your back at 21 pounds.

The 10-inch woofer and 1-inch horn tweeter deliver the vocal clarity you need to stay on pitch and the low-end definition that keeps bassists and drummers locked together. At 300 watts RMS and 8 ohms, it pairs with most monitor consoles and power amps you'll find at venues. The 8-ohm impedance also means you can daisy-chain multiple units from one amp channel when you need monitors across the stage.

Built for regular load-ins with MDF construction, aviation-grade carpet covering, and corner guards that actually protect the cabinet when you're sliding it across concrete floors. The wedge angle directs sound toward performers while reducing feedback from overhead mics. Dual connection options—1/4-inch TS jacks and raw wire terminals—work with whatever amp setup you're running.

This isn't a main PA speaker, and it's not trying to be. For small to medium venues up to 200 people, the GH10M handles stage monitoring duties reliably. If you're playing outdoor festivals or large concert halls, you'll want something with more power, but for most club and church gigs, it delivers what you need to hear yourself clearly.

Bottom line: A solid, no-nonsense floor monitor that handles 300 watts, connects easily to standard gear, and survives regular gigging without costing as much as your amp head.

Technical Specifications

• Model: GH10M
• Type: Passive
• Power (RMS): 300 Watts
• Power (Peak): 600 Watts
• Impedance: 8 Ohms
• Woofer: 10 Inch High Output Mid/Low Ribbed Cone
• Tweeter: 75 Watt Wide Dispersion 1 Inch Horn
• Frequency Response: 45 Hz to 20 kHz
• Sensitivity: 95 dB
• Connectors: 1/4 Inch TS and Raw Speaker Wire Terminals
• Dimensions (HxWxD): 18.5" x 12.5" x 12"
• Weight: 21 lbs
• Cabinet: MDF with Aviation Grade Carpet
• What's in Box: 10 Inch Wedge Floor Monitor
• Recommended For: Stage monitoring, DJ booth, church sound, rehearsal

Frequently Asked Questions

What amp power do I need to drive this properly?

You'll want a power amplifier rated between 300-600 watts at 8 ohms. Most monitor consoles and standard PA amps in this range work fine. The 8-ohm load is easy on amplifiers and lets you chain multiple monitors from one amp channel if needed.

Will this work for bass guitar and kick drum monitoring?

Yes, the frequency response goes down to 45 Hz, which covers the fundamental frequencies of bass guitar and kick drum. Unless you're monitoring heavily processed electronic music or need massive sub-bass, the 10-inch woofer provides adequate low-end for most monitoring situations.

Can I use this as a main PA speaker for small gigs?

While it's designed as a floor monitor, it can work for small venue PA in a pinch. But you'll get better audience coverage and sound quality using dedicated main speakers and keeping the GH10M for what it does best—stage monitoring.

What cables do I need to connect this?

Either 1/4-inch TS speaker cables or raw speaker wire, depending on your amp setup. If your monitor console has 1/4-inch outputs, use standard speaker cables. For binding post connections, use 12-14 gauge speaker wire. The dual input options give you flexibility for different connection scenarios.