Custom Pre-order! Thinline Telecaster HH 2024 Gold Lightweight DiMarzio Tone Zone Kluson Icon

This is a pre-order for this guitar to be built and shipped to you within 28 days. You can order it as-is, or request any upgrades or modifications prior to your purchase.

This is 100% payment for this guitar. Guitar will ship after being built.

Estimated time of completion is 28 days. 90% of the time it ships on the 27th or 28th day. 8% of the time it ships earlier. 2% of the time it's late due to unforeseen delays. I will be available at all times for updates and keep you informed of early delivery or delays. Changes can be made before and during build so long as price and payment are agreed upon and completed.

The guitar that is pictured is one that has already been built and sold.  Color or wood grain may vary slightly from that in the picture. Binding may or may not be present. You are welcome to discuss with me prior to purchase and during the build if any of these factors are important to you. If there are any drastic differences, you will be notified.

**Picture of actual body in stock and that will be used for your build is shown in the last 2 pictures.**

General Overview:

• DiMarzio Tone Zone Dual Rail Humbucker Bridge Pickup 12k
• Kluson Icon Twin Blade Humbucker Neck Pickup 13k
• Additional position for both pickups in series (Maximum pickup output)
• Humbuckers individually (partial) split
• Full level, crown, polish, set-up, playability test, inspection and packaging by a certified luthier
• D'Addario Nickel Wound XL 10-46 EXL110
• Pictures were taken indoors and outdoors to give you an overall view of the guitar. Some pictures have clouds or a hand in the mirrored reflection of the pickguard for display.

Body

• Gold Sparkle Gloss Thinline Mahogany Body with 1/4" Maple Top and Bottom Binding (Current body in stock is shown in the last picture.)

Neck

• Satin Wenge neck with matching gilded headstock 22 medium jumbo frets
• Scale length 25.5"
• Matching headstock (Sealed Gilded Gold Foil)

Hardware

• Gold Wilkinson M-Series Bridge with upgraded brass, threaded, compensated saddles and option for top-load
• Gold knobs and gold switch tip
• Gold output jack plate
• Gold strap pin buttons
• Gold Wilkinson tuners
• Gold neck plate
• Gold string ferrules
• Gold easy-glide string trees
• Gold mirrored pickguard

Switching Positions as Follows:
1. Bridge (Resistance 12.0 ohms)

2. Bridge in parallel with Neck (regular Tele position) (Resistance 6.3 ohms)

3. Neck (Resistance 13.1 ohms)

4. Neck in series with Bridge (Resistance 24.6 ohms)

Electronics

• DiMarzio Tone Zone Dual Rail Humbucker Bridge Pickup with Gold Cover 12k (Exact measure 12.0 ohms).
• Kluson Icon Twin Blade Humbucker Neck Pickup 13k (Exact measure 13.1 ohms).
• 500K Volume/Tone Potentiometer Push/Push Audio Taper
• Oak Grigsby 4-Way Blade Switch
• .022uf Tone Capacitor
• Additional position for both pickups in series (Maximum pickup output)
• Humbuckers individually (partial) split
• Pure Tone Gold Mono output Jack with multi-contact dual tension grounds & dual positive tips for optimal signal, tone & lowest possible noise.
• All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.

Full-spectrum Resistance 19 ohms to 3 ohms: Guitar has nine (9) distinct resistance settings with mix and match of push-push coil splits. Positions and resistance values are charted below at the very bottom. High-output position number 4 with bridge and neck wired in series. Coil splits are "partial" coil splits modeled after PRS "partial" coil splits to retain oomph, output, and tone. Capable of chicken-pickin' country, jazz, smooth blues, roaring rock, to stoner doom metal, the sonic possibilities are endless. Full detailed description of "Broad Spectrum Wiring" can be viewed on "Werner Guitars" Facebook page.

(Detailed) Switching Positions as Follows:
1. Bridge (Resistance 12.0 ohms)

with (partial) coil split (tone knob only) 7.9 ohms

with (partial) coil split (tone & volume knob) 4.1 ohms

with (partial) coil split (volume knob only) 5.1 ohms

2. Bridge in parallel with Neck (regular Tele position) (Resistance 6.3 ohms)

with (partial) coil split (tone knob only) 4.9 ohms

with (partial) coil split (tone & volume knob) 4.0 ohms

with (partial) coil split (volume knob only) 4.9 ohms

3. Neck (Resistance 13.1 ohms)

with (partial) coil split (volume knob only) 8.2 ohms

4. Neck in series with Bridge (Resistance 24.6 ohms)
with (partial) coil split (tone knob only) 20.7 ohms

with (partial) coil split (tone & volume knob) 8.5 ohms

with (partial) coil split (volume knob only) 8.5 ohms

Full range of resistance charted:

24.6 ohms

20.7 ohms

13.1 ohms

12.0 ohms

7.9 ohms

8.2 ohms

6.3 ohms

5.1 ohms

4.0 ohms

You have OPTIONS.  Just message before the sale if you want anything changed about the guitar.  (Color, pickups, hardware, new wiring/signal chain, etc.) You will be notified if the change can be made, time to complete, cost if any, and pictures provided as appropriate.  Get the guitar YOU want.  Message today!

Two videos of the guitar are available at the end of the pictures or on YouTube. Just search "Werner Guitars" or copy and paste one of the below titles into your YouTube search bar: Playing demo video: Sounds: Thinline Telecaster HH 2024 Gold Lightweight DiMarzio Tone Zone Kluson Icon Gilded Headstock Specifications video: Specs: Thinline Telecaster HH 2024 Gold Lightweight Gilded Headstock Mirrored Pickguard Coil Splits