****** Authorized Tone King Pedal Dealer ******
Here we have the brand new Tone King Royalist Tri-Tube Guitar Preamp Pedal.  The newest preamp from Tone King.  Tone King released the Imperial preamp which is a game changer.  The Royalist takes that same design but is based on the Royalist MkIII amplifier.  British tones for days!   The Royalist high voltage tri-tube preamp is a 2- channel preamp with Reverb for each channel. Attenuation for each channel so you can get some serious tube saturation.  This preamp used three preamp tubes combined with a Zero Watt amplifier to give you real tube sound and feel.   Each channel has three distinct voicings which gives you a wide range of sounds between the two.  Allowing you instantly switch between Eras.   Connectivity is on point  with 1/4", Midi, USB, an Effects loop  and In/out's for connecting with other analog gear.  On top of that you get balanced XLR output for direct to PA or FRFR with OwnHammer IR Cab sim.   You can also bypass the IR's if you want to use the Royalist with other analog gear or another amplifier.  There is also the Tone King Editor Software so you can setup sounds and presets on your laptop or tablet,  They thought of everything.  You can actually leave your amplifier at home.  It comes with a power supply.   The Royalist preamp sounds incredible and accurate.  The feel and touch sensitivity are there.   You may never look back at your old rig.   Thanks for looking and happy buying!
From Tone King....
Tone King Royalist PreampHigh Voltage Tri-Tube British Preamp PedalThe Sound of British Rock Royalty - Now on Your PedalboardThe Royalist Tube Preamp Pedal captures the soul of Tone King’s beloved RoyalistMKIII amplifier - the company’s most authentic take on the golden age of British tone.From the sweet, singing JTM45, through the unmistakable Plexi crunch, to the searingdrive of the Super Lead, this high-voltage tri-tube preamp pedal delivers the fullspectrum of British rock attitude in a compact, pedalboard-friendly format.Running on three 12AX7 tubes at proper high voltages, the Royalist Preamp brings thecomplete touch sensitivity, harmonic bloom, and dynamic punch of the Royalist MKIIIamp to your pedalboard. Each of its two independent channels features the amp’sFAT switch and three-way 1964/1967/1970 voicing selector, faithfully reproducing thegain structure, tone stack, and feel of the original circuits. Whether you’re chasingsparkling cleans, punchy crunch, or molten roar, the Royalist Preamp delivers theunmistakable voice of British rock, anywhere, at any volume.
Three Eras of Iconic British ToneEach channel of the Royalist Preamp offers its own three-position voicing switch,mirroring the evolution of the British amp sound across decades:1964 - Smooth top end, lower gain, and a balanced, vintage warmth inspired byearly British blues amps.1967 - Crisp treble response, bold midrange, and the aggressive bite that definedrock’s formative years.1970 - Increased gain and tightness for that unmistakable, high-energy crunch ofarena-ready hard rock.Pair these voicings with each channel’s FAT switch option to add body and low-endwarmth to single-coil guitars or enhance sustain and punch with humbuckers.Era Accurate Tone StacksThe Royalist features two identical channels, each voiced with its own distinct tonestack. The top channel uses a vintage-accurate JTM45 / Bassman / Super Bassinspired EQ. The bottom channel reflects a later-era British Lead tone stack.While the two channels can be dialed remarkably close, their subtle differences giveplayers two authentic British flavors—one tight and articulate, the other more midforward.Built-In Zero Watt Power Amp — Phase InverterThe Royalist Preamp includes Tone King’s “Zero Watt Power Amp,” a genuine phaseinverter circuit powered by one of its three 12AX7 tubes. This design captures theRoyalist’s harmonic depth and dynamic interaction between preamp and powerstage — a key ingredient of true British tone that most preamp pedals can’t replicate.The result is the full experience of an overdriven Royalist power section, without theear-splitting volume.
Impulse Response (IR) Cabinet & Power Amp SimThe Royalist Preamp Pedal features Tone King’s low-latency IR and power ampsimulation engine, offering direct output to FOH, recording interfaces, or headphoneswith stunning realism. Preloaded with a curated selection of OwnHammer IRs listedbelow, each channel includes a 3-way IR selector for instant tonal changes.OH 412 Pinstripe H25: Celestion G12H-25's from 1967 captured in a pinstripe 1982B 4x12cabinet by Kevin Rowe of OwnHammer using Shure SM57, Telefunken MD421, andRoyer 121 microphones through mid-late 1970's API 312 preamps.OH 112 Imperial TK1660: Tone King 1660 captured in a Tone King Imperial 1x12 comboby Kevin Rowe of OwnHammer using Shure SM57, Neumann U87, and Royer 121microphones through mid-late 1970's API 312 preamps.OH 412 M75BB: 16-ohm, 1777 cone Celestion "black back" G12M-75's from 1975captured in a 412 cabinet by Kevin Rowe of OwnHammer using Shure SM57 andSennheiser MD421 microphones through mid-late 1970's API 312 preamps.There are 20 IRs to choose from in the included Tone King Editor software (poweredby Synergy) which are easy to swap in and out of the pedal's six available slots. Youcan also disengage the onboard IR loader entirely to use the preamp with anexternal IR loader or powered cabinet.Tone King Editor Software - Deep Control, ModernFlexibilityThe included Tone King Editor software unlocks deep editing capabilities for digitalparameters. Save and recall up to 128 presets via MIDI, assign IRs per channel, fine-tune HF and LP filters, and configure reverb, or FX loop assignments — all in oneintuitive interface.
Savable Parameters• Channel switching and bypass states• Easily load your own IRs and manage your IR library• IR bypass and power amp simulation options• HF Comp and Low-Pass filters• Access all 20 included OwnHammer IRs• Assign any of your IRs to the pedal's six available slots (three per channel)• Reverb, reverb tails, and effects loop bypass routing• Save these settings to up to 128 presets for instant recall via MIDIExpanding Your RigThe Royalist Preamp Pedal is equally at home on stage, in the studio, or integratedwith your favorite amp.Add Channels to Your Amp:Use the 3-cable method with any amp that has a series effects loop to instantly addtwo channels of British tube tone to your existing rig.Combine with Other Preamps:Link multiple effects-loop-equipped preamp pedals to build an ultimate hybridsystem. Assign the Royalist’s IRs and power amp emulation to other preamps, orroute its reactive output into a separate power amp and cabinet for the real-airexperience.The Sound of British Heritage, Reborn for the Modern PlayerFrom the club stages of the ‘60s to the arenas of the ‘70s, the sound of British rockhas defined generations of guitar tone. Now, with the Royalist Tube Preamp Pedal,that legacy lives on — delivering the roar, chime, and harmonic richness of thoselegendary amplifiers in a compact, high-voltage, pedalboard-ready design.
Features• Two Channel High-Voltage preamp – DI• 3 x 12AX7 preamp tubes running at proper high voltages• Built-In zero-watt power amp - phase inverter circuit• Two Independent channels witho Volume, Bass, Middle and Treble Control• Three-way 1964/1967/1970 voicing switch per channel• Era Accurate Tone Stacks:o Top channel - Vintage-accurate JTM45 / Bassman / Super Bassinspired EQ.o Bottom channel - Reflects a later-era British Lead tone stack.• Dual built-in Iron Man attenuatorso HF switches• Reverb control (assignable to each channel)o Mode switch turns ON/OFF trails• Stereo, Series FX loop (bypassable)• MIDI programmable
 Save up to 128 presets for instant recall via an external MIDI switchero Presets save:o Channel selectiono Master bypass settingo IR selectiono IR bypass settingo Effects loop bypass settingo Reverb bypass and tails settings• Onboard Impulse Response (IR) Technologyo Low-latency Impulse Response cabinet simulation (bypassable)o 3-position CAB/IR select switch per channel (programmable viasoftware)o 20 Included OwnHammer IRs• Power amp simulation with software editable HF Comp, Low-Pass and High-Pass filters (per channel)• Connections:o Dual stereo balanced XLR outputs with Ground Lift Switcho ¼" Headphone outputo Effects Send and Stereo Return Jackso MIDI 5-pin standard connectoro USB-C connector for use with the included Tone King Editor softwareeditoro To Amp In, From Amp Send and From Amp Return Jacks – for addingImperial channels to your amp or preamp• Includedo 6’ USB Cableo Universal 12V Power Supply• Dimensions: 7.2” (W) x 5.7” (D) x 2.75” (H)• Weight: 1.9 lbs 
                          We ship via Fedex ground, UPS, or USPS and insurance is always included in shipping.  

Sales tax will be collected for all New York residents. Due to new laws in effect, other states are now collecting tax as well. Please note that this is out of our hands. If your state collects sales tax, it will be added to the sale total.  

 Payments must be made within 48 hours of Sale/Auction's end.

Feel free to send a message if you have any questions. We are a full service music store in Melville, Long Island, NY. Hours- Mon-Thursday 11am-8pm Friday + Saturday 11am-6pm

                                           GOOD LUCK AND HAPPY BUYING!!!