Mullard 6922 tNOS AT1000 TESTED Balanced! PI Vacuum Tube BVA E88CC dual triode 1962-1968

This listing is for one (1) Mullard-made 6922 E88CC dual triode vacuum tube in the standard tube shape. It has a B9A 9DE noval 9-pin base, grey plate, and top halo getter.

Made in USA. No etched glass code visible.

This tube has been tested to be perfectly balanced in transconductance (Gm) between the two sections. It is appropriate for phase-inverter positions and other demanding roles.

Your tube has been fully tested on a computer-regulated, USA-made Amplitrex AT1000 on Fixed Bias setting with like new, NOS results (tNOS). Here's what that means: to qualify for this listing, several stringent conditions must be met: The transconductance for each section must measure between 10000 uMhos and 15000 uMhos, consistent with original 1962 RCA, Western Electric, Sylvania, GE, and/or Tung-Sol datasheet specifications for new tubes of this type. The tube must also show no shorts, show a gas current less than 1.5 mA, and a heater-to-cathode leakage of less than 10 microamps (10 uA). The tube might have mechanical wear or have the label rubbed off - these are very old! Used-testing tubes are available in a separate listing at a significant discount. Every tNOS or Used Good tube you receive from Sound By Doc is guaranteed against failure for 60 days after purchase, an industry extreme!

These photos are not stock photos. You are looking at the actual tube you will receive. If a box or boxes are in the photos, you will get them. If test results appear in the photos, look close, because those are the test results of the tube you will receive! SKU 6DJ8-6922us1022PI. Please note that matching is nearly always possible for us from stock that is inventoried but not yet listed. If you need a matched pair or quad etc., please use the make-an-offer feature through Reverb. Matching requires an extra burst of effort, so please add $5 per tube to your offer for 10% matching and $10 per tube for 4% matching. [Matching is based on plate current for power tubes, voltage drop for rectifiers, and GM for all other tubes. If you also require the label or internals to match, please specify that in your offer.]