******* Authorized EarthQuaker Devices Dealer *******
Here we have the brand new EarthQuaker Devices ZEQD-Pre Guitar Tube Preamp Pedal. A collaboration with the famous Dr Z Amplification. This pedal comes along at a time where guitar players want to bring less and less to the gig or session. The ZEQD-Pre lets you have all the glory of the famous EF86 circuit on your pedal board. You can run all your analog pedals into the front end, just like you would if you were plugging into a traditional amplifier. With the ZEQD-Pre, you get an XLR output with cab sim (bypass switch on the side) This means you can run straight to a DAW or FOH. Instant tone without lugging your amplifier. This pedal is powered by a 9v dc power supply with a minimum of 500mA of current. Power supply is not included. These pedals are handmade in the USA. Add some EQD/DR Z tone to your rig today. Thanks for looking and happy buying!
From EQD site....
ZEQD
-
Pre Tube Preamp
The All
-
Analog Simulation Solution
A collaboration between EarthQuaker Devices and Dr. Z Amplification
The ZEQD
-
Pre is an all
-
analog tube preamplifier that brings together EarthQuaker Devices'
innovative pedal design and
Dr. Z Amplification’s
decades of tube amp expertise. With a
passive Three
-
Band EQ, professional headphone output, balanced XLR output, and onboard
analog cabinet simulation, the
ZEQD
-
Pre delivers authentic tube warmth and dynamic response
in a complete analog amplifier system that fits right on your pedalboard.
Designed to live at the end of your signal chain, the ZEQD
-
Pre adds classic tube character to
everything upstream. Its pa
ssive Three
-
Band EQ provides precise tonal control
—
fine
-
tune your
amp's voice, push its preamp into rich harmonic overdrive, or breathe dimension and life into a
modeling setup.
This pedal is a simple, modern tool devised to give you all the organic son
ic character and
dynamic response of a tube amp in a compact and convenient form factor. There are no menus
to dive through. No IR loading. No firmware updates. No 0s, 1s, or any other pesky digital
artifacts to get in the way of you and your tone. The ZEQ
D
-
Pre is the no
-
fuss analog solution to
all your digital woes.
The ZEQD
-
Pre features a built
-
in analog cabinet simulation for realistic amp feel during quiet
practice sessions to give you the full EF86 tube character without disturbing your housemates.
Thi
s feature is handily disengaged via the Cab Bypass switch enabling you to send a pure
signal to your preferred IR loader or modeling software and making it perfect for direct
recording, backline
-
free gigs, or hybrid rigs with multiple signal paths.
Hit the
Boost footswitch and the Three
-
Band EQ drops out completely, delivering a full
-
range
boost with its own dedicated level control. Two distinct tones at your feet: sculpted EQ tone or
wide
-
open boosted voice. Simple, immediate, and musical.
The ZEQD
-
Pre use
s the EF86 pentode
—
the same tube that gives many Dr. Z amplifiers their
pristine hi
-
fi tone and makes them such responsive pedal platforms. What does that mean for
you? It means dynamic and nuanced touch sensitivity, hi
-
fi full frequency clarity, and an EQ
that
is both predictable and highly responsive.
Though designed with guitarists in mind, the ZEQD
-
Pre’s broad range of EQ voices and tube
warmth can enrich the sonic color and harmonic content of just about anything you can think of
plugging into it, inc
luding, but not limited to, bass, synths, keys, drums, vocals, and
microphones.
Each ZEQD
-
Pre is built by one sophisticated droid and many kind
-
hearted flesh and blood
artisans in the tropical metropolis of Akron, Ohio USA.
Activate Foot Switch: This acti
vates or bypasses the ZEQD
-
Pre
Boost Foot Switch: This defeats the tone controls and delivers a full range
boost without altering the frequency response. This switch is only active
when the Activate switch is on.
Bass: Adjusts frequencies from 20Hz
-
400Hz
Middle: Adjusts frequencies from 400Hz
-
2KHz
Treble: Adjusts Frequencies from 2KHz
-
20KHz
Level: Output volume control when the tone controls are active
Boost: Output volume control for when the Boost is active and the tone
controls are bypassed.
Ground Lift
(On Side): Press for ground lift on the XLR output.
Cab Bypass (On Side): Press to remove the analog cabinet simulation on
the XLR out.
Headphone Out (On Side): TRS ¼”
Direct Out (On Side): Balanced XLR
Lifetime Warranty
USA MAP price: $399
GTIN
-
12
(U.P.C.): 810019915383
SKU: EQDZEQDV1USA
Boxed Dimensions: 6.5" x 5.25" x 3.125" / 16.51 cm x 13.335 cm x 7.9375 cm
Out of Box Dimensions: 5.875" x 3.9375" x 2.75" / 14.9225 cm x 10.00125 cm
x 6.985 cm
Boxed Weight: 1.535 lbs. / 0.69626429 kg.
Out of Box W
eight: 1.255 lbs. / 0.56925842 kg.
Switching: ZEQD
-
Pre uses mechanical true bypass switching.
Input Impedance: 10 MΩ
Output Impedance: Variable
Headphone Out Impedance: 39Ω
Direct Out Impedance: 100Ω
Current Draw: 500mA
We ship via Fedex ground, UPS, or USPS and insurance is always included in shipping.
Sales tax will be collected for all New York residents. Due to new laws in effect, other states are now collecting tax as well. Please note that this is out of our hands. If your state collects sales tax, it will be added to the sale total.
Payments must be made within 48 hours of Sale/Auction's end.
Feel free to send a message if you have any questions. We are a full service music store in Melville, Long Island, NY. Hours- Mon-Thursday 11am-8pm Friday + Saturday 11am-6pm
GOOD LUCK AND HAPPY BUYING!!!
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
|---|---|
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Year |
|
| Made In |
|
| Pedal Format |
|
Product safety information may be available here.










