TRM 1x15 guitar extension cabinet tweed style OPEN back 115 project.

PLEASE NOTE: This is a made to order item and is not ready for immediate shipping. Please allow 20 business days for your order to ship.

WHAT IS IT? This is a TRM unfinished for project tweed style 1 x 15 open back pine cabinet. See my other listings for different styles and sizes. It is assembled and ready for you to finish the way you want. Many customers like to do a wood finish such as stain then either tung oil, polyurethane, or lacquer. Can also be tolexed or carpeted. (Speaker, tolex, grill cloth, handle, and feet are NOT included. Save money and finish it yourself.

CONSTRUCTION: Proudly handcrafted in the U.S.A by TRM Guitarcabs. This is made from clear (no knots) 3/4" eastern white pine for the outer shell. The corners are dovetailed and the edges are 1/2" radiused. Outside dimensions are 20" wide x 20" h x 10"deep. Baffle and rear panel are made from 1/2" voidless birch ply wood. The baffle is test load rated for 70 + lbs. which is good because most speakers are less than 20 lbs.

ALL WIRE AND READY TO ROCK: These come with tee-nuts pressed into the baffle and machine screws for speaker mounting. It is wired with a 1/4" switchcraft jack with female clips ready for speaker hookup. Buyer is responsible for proper hookup and ohms matching to your amplifier. The cab can be used as is for a Hardtrucker look but, obviously would look nicer finished.

BAFFLE: The baffle is rear loading which means the speaker mounts from the inside to the back of the baffle. The baffle is held in by wood screws. Remove the screws and the baffle will come out then a grill cloth can be stapled to the edges. Then just simply reinstall the baffle then you can load the speakers from behind. No need for a separate grill cloth.

SHIPPING: These are shipped via UPS Ground.. PLEASE allow 21 business days to process this order.

FEATURES:

- Top quality pine with dovetailed corners for FAT tone.

- Rigid 1/2 voidless birch plywood baffle and rear panel.

- Open back rear panel.

- Baffle comes out and a grill cloth can be stapled to the edges.

- Speaker mounting tee nuts are pressed in and machine screws included.

- Presoldered 1/4" jack with female clips for speaker hookup.

- 20"w x 20"h x 10"deep.

- Average weight is around 18 lbs.

Ships UPS Ground to the U.S.

Thanks for looking.