• Model: S-63
• Serial Number: NG-6289
• Body Wood: Ash
• Neck Wood: Maple 
• Neck Profile: C Shape; .842" depth @ 1st fret, .954" @ 12th
• Radius: Nautilus Radiused Neck
• Fingerboard: Rosewood
• Scale Length: 25 1/2" 
• Inlays: Clay Dots
• Nut: Tusq, 1.69" width
• Tuners: Gotoh Vintage 
• Bridge: Vintage Tremolo
• Pickguard: Gold Anodized
• Pickup: Lollar Custom-Wound Pickups
• Finish: 2 Tone Sunburst
• Case: Triangular Hard Shell case w/ Gold Gator Tolex
• Weight: 7 lbs 7.5 oz
• Handmade In Olympia, WA - USA

NAUTILUS NECK - A Revolutionary Breakthrough in Guitar Necks

• Significantly Lower String Height/Action
• Freedom from Fret Rattle
• Increased Sustain and Resonance
• Effortless, Unlimited Bends—Without Fretting Out

(From Nash Guitars' Website)

"At some point, it hit us: guitars and other fretted instruments have been relying on a fundamentally flawed system of fretboard and fret radii. Traditional single-radius and even common compoundradius necks require significant relief and higher-than-desired action to compensate—for string clearance, bending, and reducing fret buzz. It’s functional, but far from optimal. We found a better way: Using the same math that determines fret spacing (commonly called “The Rule of 18”—where each fret is 1/18th closer than the last), we applied this principle to fretboard radius."

"The result? A radically progressive radius, where every fret is 1/18th flatter than the one before it. This means that every position you place your fingers, the position one step above has built-in clearance. This clearance is normally achieved through neck relief and high action. The Nautilus neck does this by the radical new design."

"The outcome is game-changing: our patented Nautilus Neck design requires little to no neck relief. Action can be set incredibly low, bending is easier and virtually unlimited thanks to mathematically optimized fret clearance." ---Bill Nash