This is a GIBSON Les Paul Deluxe Gold Top lefty model.
The serial number is 74-75, but there are many features from '75 such as 3-piece maple neck, 2-ply truss rod cover, and Gibson Deluxe 2-row engraving, so I think it can be judged as '75. The pot date is readable only for the rear tone, and the rest is not visible due to the solder covering, but it is believed to be original, and the pickups are also judged to be equipped with Gibson mini humbuckers. In addition, it has the original double-ring escutcheon specification.
The body is made of 3-ply maple top, and the back is made of mahogany with thin maple in between.
There is a paint crack at the neck joint and a slight gap between the binding and the body at the neck.
One PU screw has been replaced, there are buckle marks on the back of the body, the back panel is distorted, and there are other age-related scratches and dents throughout.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 396086
Country of manufacture: U.S.A.
Case: Hard Case (with sticker and writing)
Weight: 4.40kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 24.4mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified part: 1 PU screw replaced on front SW side
Repair/Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 396086

Country of manufacture: U.S.A.

CaseHard case (with sticker/writing)

Weight 4.40kg

No truss rod problem.

No fret remainder problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.8mm

Neck thickness near 1st fret 20.3mm

Neck thickness near 12th fret 24.4mm

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Modified partReplacement of one PU screw on the front SW side

Repair/Maintenance partCleaning, string change, rod adjustment, octave adjustment, string height adjustment

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your country

We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.

More information please confirm our shop policy.