**NEW Upgrade options**:

  • Seymour Duncan bridge pickup humbucker or single coil $69
  • Seymour Duncan neck pickup humbucker or single coil $69

This is a pre-order for this guitar to be built and shipped to you within 28 days. You can order it as-is, or request any upgrades or modifications prior to your purchase.

This is 100% payment for this guitar. Guitar will ship after being built.

Estimated time of completion is 28 days. 90% of the time it ships on the 27th or 28th day. 8% of the time it ships earlier. 2% of the time it's late due to unforeseen delays. I will be available at all times for updates and keep you informed of early delivery or delays. Changes can be made before and during build so long as price and payment are agreed upon and completed.


The guitar that is pictured is one that has already been built and sold.  Color or wood grain may vary slightly from that in the picture. Binding may or may not be present. You are welcome to discuss with me prior to purchase and during the build if any of these factors are important to you. If there are any drastic differences, you will be notified.

**Picture of actual body in stock and that will be used/modified for your build is shown in the last 3 pictures.

Switching Positions as Follows:
1. Bridge (Resistance 14.5 ohms)
2. Bridge in parallel with Neck (regular Tele position) (Resistance 4.8 ohms)
3. Neck (Resistance 7.1 ohms)
4. Neck in series with Bridge (Resistance 21.3 ohms)

General Overview:

  • Additional position for both pickups in series (Maximum pickup output)
  • Humbuckers individually (partial) split
  • Broad-Spectrum Wiring. Full explanation of the wide range of tones is given below
  • Pure Tone Black Nickel Mono output Jack with multi-contact dual tension grounds & dual positive tips for optimal signal, tone & lowest possible noise.
  • Full level, crown, polish, set-up, playability test, inspection and packaging by a certified luthier
  • D'Addario Nickel Wound XL 10-46 EXL110

Body:

  • Reclaimed Pine Body with Stain and Nitro Finish

Neck:

  • Scale length 25.5"
  • Black Maple Neck with Matte Finish. 22 medium jumbo frets.

Hardware:

  • Black Modern Bridge with Roller Saddles
  • Black knobs and Black switch tip
  • Black output jack plate
  • Black strap pin buttons
  • Black Wilkinson or Saphue tuners
  • Black String Ferrules (May be all-in-one configuration)
  • Black neck plate
  • Black roller string tree

Electronics:

  • Black Humbucker Bridge Pickup 15k (Exact measure 14.5 ohms).
  • Black Dual-rail Humbucker Neck Pickup 7k (Exact measure 7.1 ohms).
  • 500K Push/Pull Volume/Tone Potentiometer Audio Taper
  • Oak Grigsby 4-Way Blade Switch
  • 0.022uF Capacitor
  • Pure Tone Black Nickel Mono output Jack with multi-contact dual tension grounds & dual positive tips for optimal signal, tone & lowest possible noise.
  • All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed. (Remote neck pocket is also tied into ground.)

Full-spectrum Resistance 21 ohms to 3 ohms: Guitar has nine (9) distinct resistance settings with mix and match of push-push coil splits. Positions and resistance values are charted below at the very bottom. High-output position number 4 with bridge and neck wired in series. Coil splits are "partial" coil splits modeled after PRS "partial" coil splits to retain oomph, output, and tone. Capable of chicken-pickin' country, jazz, smooth blues, roaring rock, to stoner doom metal, the sonic possibilities are endless. Full detailed description of "Broad Spectrum Wiring" can be viewed on "Werner Guitars" Facebook page.

You have OPTIONS.  Just message before the sale if you want anything changed about the guitar.  (Pickups, hardware, new wiring/signal chain, etc.) You will be notified if the change can be made, time to complete, cost if any, and pictures provided as appropriate.  Get the guitar YOU want.  Message today!


Switching Positions as Follows:


1. Bridge (Resistance 14.5 ohms)

with (partial) coil split (tone knob only) 9.1 ohms

with (partial) coil split (tone & volume knob) 3.5 ohms

with (partial) coil split (volume knob only) 4.1 ohms

2. Bridge in parallel with Neck (regular Tele position ) (Resistance 4.8 ohms)

with (partial) coil split (tone knob only) 4.0 ohms

with (partial) coil split (tone & volume knob) 3.2 ohms

with (partial) coil split (volume knob only) 3.6 ohms

3. Neck (Resistance 7.1 ohms)

with (partial) coil split (volume knob only) 4.9 ohms

4. Neck in series with Bridge (Resistance 21.3 ohms)
with (partial) coil split (tone knob only) 16.0 ohms

with (partial) coil split (tone & volume knob) 5.4 ohms

with (partial) coil split (volume knob only) 5.4 ohms

Full range of resistance:

21.3 ohms

16.0 ohms

14.5 ohms

9.1 ohms

7.1 ohms

5.4 ohms

4.9 ohms

4.0 ohms

3.2 ohms

This item is sold As-Described

This item is sold As-Described and cannot be returned unless it arrives in a condition different from how it was described or photographed. Items must be returned in original, as-shipped condition with all original packaging.Learn More.

Promoted similar listings













ConditionBrand New (New)
Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more
Brand
Model
  • RD Telecaster Hybrid
Finish
  • Brown Black
Categories
Year
  • 2025
Right / Left Handed
  • Right Handed
Number of Strings
  • 6-String
Body Type
  • Solid Body

Product safety information may be available here.

Werner Guitars

Greensburg, IN, United States
Joined Reverb:2014

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Oops, looks like you forgot something. Please check the fields highlighted in red.