This Vox AC50CP2 sounds amazing and has tons of awesome tube tone!! Vox amp stand is included but cannot be sold separately.

From CHATgpt:

🔍 Specs

• Power output: 50 Watts RMS into selectable 8 Ω or 16 Ω load.
• Speaker complement: 2 × VOX/Wharfedale GSH1230 12″ speakers (8 Ω each, wired in series for a total of 16 Ω) in the combo cabinet.
• Tube complement:
• • Preamp: 4 × 12AX7/ECC83 tubes.
  • Power amp: 2 × EL34B tubes.
• Channels & tone features:
• • 2 switchable channels. Channel 1 is based on VOX’s classic “chime/Top Boost” clean/overdrive style. Channel 2 is a higher-gain lead channel with extra controls: “Bright” switch, “Fat” switch, Presence control, etc.
• Effects & connectivity:
• • Foot-switchable spring reverb (with level control for each channel).
  • Series effects loop (with selectable level control and true bypass) for external effects.
  • Direct (DI) output: Balanced XLR + unbalanced ¼″ jack, with speaker-emulating low-pass filter and ground lift. The DI output is independent of the master volume, allowing silent or late-night high-gain usage.
• Dimensions & Weight:
• • Width × Height × Depth: approx. 702 × 265 × 540 mm (≈ 27.6″ × 10.4″ × 21.3″)
  • Weight: approx. 35 kg (≈ 77.2 lbs)
• Production notes: This model was introduced around 2007 and discontinued around 2009.

✅ Notable features / overview

• Combines VOX’s classic chiming clean tone (channel 1) with a more modern/higher-gain channel (channel 2) — great versatility.
• The DI output with speaker simulation makes it suitable for direct recording or PA use without relying solely on a miked speaker.
• 50 Watts (tube) gives plenty of headroom for live use or studio use, and the 2×12 configuration is more portable than larger 4×12 rigs.
• If you like VOX tone but also want more “lead/overdrive” capability, this amp is a strong candidate.