A Les Paul Deluxe from the 1970s, which has been gaining in reputation in recent years, is now in stock!
This instrument is made in the early 70's with a pancake body made of thin maple between mahogany backs, maple top, 3-piece mahogany neck with volute, and rosewood fingerboard.
The pickups, a key feature of the Deluxe, are mini humbuckers with PAT number stickers on both the front and rear. The cover is engraved with the Gibson logo, a specification that was only available for a very short period of time.
Other electrical components are also original. Some pots are soldered and the date cannot be seen, but the date "1377230" can be seen on the front tone pot.
The pegs are double-ring Crusons, and the bridge and tailpiece are also believed to be original.
The frets are original, but have been worn down to a very low level. The frets are believed to be original, but have been worn down to a very low level. The nut also has a deeper groove to match the height of the frets.
As for other changes and modifications, the corner of the bridge saddle has been shaved. The third string peg shaft is slightly bent, but this is not a problem. The jack plate has been replaced with a brass one.
There is a chip on the tip of the head, a buckle mark on the back of the body, and other age-related scratches and dings throughout.
The vintage gold top has a deep greenish-blue color, which is typical of vintage gold tops, and this guitar has a lot of character.

The hard case is original, but the handle is damaged.
Item Rank: B+: Some scratches, but no problem for normal use.

Serial number: 737789
Year of manufacture: 1972
Country of manufacture: USA
Case: Hard case (handle is broken)
Weight: 4.36kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret remaining: about 20-30%, need to consider replacing when next time for repair
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 24.6mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
737789

Year of manufacture
1972

Country of manufacture
U.S.A.

Case
Hard case (handle damaged)

Weight
4.36kg

Truss Rod
No problem, confirmed to 60 degrees to the left and right

Remaining frets
20-30%, need to consider replacement at next repair.

String height (bass string side)
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.2mm

Neck thickness near 1st fret
20.4mm

Neck thickness near 12th fret
24.6mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were originally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!All import duties, customs fees, and procedures are the buyer's responsibility - please be aware of the requirements for your country

We will check the condition of the items that we received order over before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.