DPW Design P4 Pedal Power Supply

The P4 is a pedal power module that produces up to two times 1000 mA off 9V power intended to power pedals from your case for easy integration with eurorack systems. The main limitation of power out from the P4 module is how much current you can draw from the +12V rail in your system. Be sure to check that your eurorack system can supply enough current through this module to the pedal or other equipment you are powering with the 9V from this module.

The module is divided in two halves. The upper two outputs can supply +9V, 1000 mA divided on the two outputs. The outputs have center negative on the connectors as shown on the symbol on the front panel. The lower two outputs works exactly like the upper two and can also supply 1000 mA. The outputs are short circuit protected.