Custom Pre-order! Thinline Telecaster HH 2025 3-Color Vintage Sunburst Lightweight 4-Way

**NEW Upgrade options**:

• Seymour Duncan bridge pickup humbucker or single coil $69
• Seymour Duncan neck pickup humbucker or single coil $69

This is a pre-order for this guitar to be built and shipped to you within 28 days. You can order it as-is, or request any upgrades or modifications prior to your purchase.

This is 100% payment for this guitar. Guitar will ship after being built.

Estimated time of completion is 28 days. 90% of the time it ships on the 27th or 28th day. 8% of the time it ships earlier. 2% of the time it's late due to unforeseen delays. I will be available at all times for updates and keep you informed of early delivery or delays. Changes can be made before and during build so long as price and payment are agreed upon and completed.

The guitar that is pictured is one that has already been built and sold.  Color or wood grain may vary slightly from that in the picture. Binding may or may not be present. You are welcome to discuss with me prior to purchase and during the build if any of these factors are important to you. If there are any drastic differences, you will be notified.

Switching Positions:
1. Bridge (Resistance 11.9 ohms)
2. Bridge in parallel with Neck (regular Tele position) (Resistance 4.7 ohms)
3. Neck (Resistance 7.7 ohms)
4. Neck in series with Bridge (Resistance 19.2 ohms)

General Overview:

• Additional position for both pickups in series (Maximum pickup output)
• Humbuckers individually (partial) split
• Full level, crown, polish, set-up, playability test, inspection and packaging by a certified luthier
• D'Addario Nickel Wound Strings XL 10-46 EXL110

Body:

• Body Thinline Gloss 3-tone Vintage Sunburst
• Matching Black F-hole

Neck:

• Scale length 25.5"
• Black Matte Maple neck with Rosewood fretboard, modern "C" profile, and 22 medium-jumbo frets.

Hardware:

• Black 3-saddle bridge with compensated brass saddles
• Black pickguard with black knobs and black switch tip
• Black output jack plate
• Black strap pin buttons
• Black Wilkinson Tuners
• Black neck plate
• Gold string ferrules
• Black rolling string trees

Electronics:

• Black Dual Rail Humbucker Bridge Pickup 12k (Exact measure 11.9 ohms).
• Black Humbucker Neck Pickup 8k (Exact measure 7.7 ohms).
• 500K Volume/Tone Potentiometer Push/Pull Audio Taper
• Oak Grigsby 4-Way Blade Switch
• 0.022uF 2A223J 100V 22nF Polyester Film Capacitor
• Additional position for both pickups in series (Maximum pickup output)
• Humbuckers individually (partial) split
• All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.

Full-spectrum Resistance 19 ohms to 3 ohms: Guitar has nine (9) distinct resistance settings with mix and match of push-push coil splits. Positions and resistance values are charted below at the very bottom. High-output position number 4 with bridge and neck wired in series. Coil splits are "partial" coil splits modeled after PRS "partial" coil splits to retain oomph, output, and tone. Capable of chicken-pickin' country, jazz, smooth blues, roaring rock, to stoner doom metal, the sonic possibilities are endless. Full detailed description of "Broad Spectrum Wiring" can be viewed on "Werner Guitars" Facebook page.

You have OPTIONS at Werner Guitars.  Just message before the sale if you want anything changed about the guitar.  (Pickups, hardware, new wiring/signal chain, etc.) You will be notified if the change can be made, time to complete, cost if any, and pictures provided as appropriate.  Get the guitar YOU want.  Message today!

Available Options:

• Add Tesi kill switch 24mm white (or any other color) $49
• Change to standard telecaster with two single-coil pickups and a 3-way switch for free.
• Add Jimmy Page wiring $199 (This changes the switch to 3-way, and both pickups to humbucker and two more potentiometers.)
• Add Jimmy Page wiring with independent middle humbucker $299 (This changes all pickups to humbucker, the switch to 3-way, adds a middle humbucking pickup and three more potentiometers.)
• Add Nashville wiring $149 (This will add a middle pickup and all 3 pickups will be single coil. Will be wired in the classic Nashville style format unless you request any modifications.)
• Add padded gigbag $19
• Change the color of the body and/or neck.

Switching Positions as Follows:

1. Bridge (Resistance 11.9 ohms)

with (partial) coil split (tone knob only) 7.5 ohms

with (partial) coil split (tone & volume knob) 3.4 ohms

with (partial) coil split (volume knob only) 4.0 ohms

2. Bridge in parallel with Neck (regular Tele position ) (Resistance 4.7 ohms)

with (partial) coil split (tone knob only) 3.9 ohms

with (partial) coil split (tone & volume knob) 3.1 ohms

with (partial) coil split (volume knob only) 3.7 ohms

3. Neck (Resistance 7.7 ohms)

with (partial) coil split (volume knob only) 5.3 ohms

4. Neck in series with Bridge (Resistance 19.2 ohms)
with (partial) coil split (tone knob only) 15.0 ohms

with (partial) coil split (tone & volume knob) 5.7 ohms

with (partial) coil split (volume knob only) 5.8 ohms

Full range of resistance:

19.2 ohms

15.0 ohms

11.9 ohms

7.7 ohms

5.8 ohms

5.3 ohms

4.7 ohms

3.9 ohms

3.1 ohms