Hartke Systems Model 3500 Transient Attack Bass Amp Head (Refurbished)
This seller has not set a shipping cost for Ireland. Please contact them to ask about shipping.
Price€270.18
+ Shipping
Listed:a year ago
Views:545
Watchers:16
Offers:0
Clermont, FL, United States
Our users rate Reverb
Please call for shipping price information.
Power: 350 Watts at 4 Ohms; 240 Watts at 8 Ohms
Selectable Tube and Solid-State Preamps
Rotary Bass and Treble Contour Controls
10-band graphic EQ
Adjustable Compression
Balanced XLR Out
Total Harmonic Distortion: Less than 1% at Rated Power
Signal-to-Noise: Approx. 78 dB
Effects: Send and Return
Bipolar Design
Passive/Active Input Jack
Rack-Mountable
Product Description
The Hartke Systems Model 3500 Bass Amplifiers offers all the newest concepts in bass amplification.
Features
Power to spare - a full 350 watts into 4 ohms.
Hartke's unique Transient Attack¬ circuitry ensures that every nuance of your bass performance is reproduced faithfully.
Two Pre-Amp input knobs, allowing custom blending of tube and solid state sounds.
Ten bands of high-quality graphic equalization, allowing you to create a broad range of tonal colors for your bass instrument. A dedicated in/out button allows you to preset an equalization curve.
Two fully adjustable contour knobs (high pass and low pass) provide further control over shaping your bass sound.
A built-in compressor not only adds real "punch" to your bass sound, but also allows you to smooth out volume differences between notes.
Two independent inputs accommodate both passive and active bass guitars.
Protection relay circuitry protects connected speakers from dangerous overloading, and prevents "thumps" when powering on or off.
Effect loop send and return jacks allow you to connect to professional outboard effects processors.
An effect Balance knob enables you to adjust the relative amount of Send ("dry") versus Return ("wet") effect signal being routed to the speaker outputs.
An electronically balanced direct output provides a means of routing signal to professional mixing consoles in both live performance and recording environments. A ground loop switch helps prevent hum or buzz from entering the signal, and a pre/post switch allows the direct signal to be derived either before or after the amp EQ section.
LEDs show you the settings of the graphic equalizer in low-light environments, as well as a 2-color LED that continuously shows the status of the compression circuitry in response to your playing.
Rugged construction makes the Model 3500 eminently roadworthy.
Power: 350 Watts at 4 Ohms; 240 Watts at 8 Ohms
Selectable Tube and Solid-State Preamps
Rotary Bass and Treble Contour Controls
10-band graphic EQ
Adjustable Compression
Balanced XLR Out
Total Harmonic Distortion: Less than 1% at Rated Power
Signal-to-Noise: Approx. 78 dB
Effects: Send and Return
Bipolar Design
Passive/Active Input Jack
Rack-Mountable
Product Description
The Hartke Systems Model 3500 Bass Amplifiers offers all the newest concepts in bass amplification.
Features
Power to spare - a full 350 watts into 4 ohms.
Hartke's unique Transient Attack¬ circuitry ensures that every nuance of your bass performance is reproduced faithfully.
Two Pre-Amp input knobs, allowing custom blending of tube and solid state sounds.
Ten bands of high-quality graphic equalization, allowing you to create a broad range of tonal colors for your bass instrument. A dedicated in/out button allows you to preset an equalization curve.
Two fully adjustable contour knobs (high pass and low pass) provide further control over shaping your bass sound.
A built-in compressor not only adds real "punch" to your bass sound, but also allows you to smooth out volume differences between notes.
Two independent inputs accommodate both passive and active bass guitars.
Protection relay circuitry protects connected speakers from dangerous overloading, and prevents "thumps" when powering on or off.
Effect loop send and return jacks allow you to connect to professional outboard effects processors.
An effect Balance knob enables you to adjust the relative amount of Send ("dry") versus Return ("wet") effect signal being routed to the speaker outputs.
An electronically balanced direct output provides a means of routing signal to professional mixing consoles in both live performance and recording environments. A ground loop switch helps prevent hum or buzz from entering the signal, and a pre/post switch allows the direct signal to be derived either before or after the amp EQ section.
LEDs show you the settings of the graphic equalizer in low-light environments, as well as a 2-color LED that continuously shows the status of the compression circuitry in response to your playing.
Rugged construction makes the Model 3500 eminently roadworthy.
| Listed | a year ago |
|---|---|
| Condition | Excellent (Used) Excellent items are almost entirely free from blemishes and other visual defects and have been played or used with the utmost care.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Electronics |
|
| Number of Inputs |
|
| Power Tube Type |
|
| Reverb |
|
| Color Family |
|
| Number of Channels |
|
| Impedance |
|
| Output Power (Watts) |
|
Product safety information may be available here.
